We propose a graphene based metasurface to investigate the function of switchable polarization selective wave manipulation in THz regime by using the finite-difference time-domain (FDTD) method. The proposed metasurface consists of two layers of graphene arrays, polymer dielectric spacer and a gold mirror film, which can be switched between two states by simply biasing the two graphene layers ON and OFF with the designed voltage and zero voltage without reconfiguring the Fermi energy distribution. One state is for x polarized wave manipulation and the other is for y polarization incidence. Then, the functions of switchable polarization selective anomalous reflection and focusing effect for 6 THz wave are realized by configuring the structure with specific values of Fermi energy. Moreover, we also designed the structure to focus at other spatial positions and another working frequency of 5.5 THz by reconfiguring the Fermi energy distributions.
The metalens has been a hotspot in scientific communications in recent years. The polarization-controlled functional metalens is appealing in metalens investigation. We propose a metalens with dual functions that are controlled by polarization states. In the first design, when applied with x- and y-polarized light, two focal spots with different focal lengths are acquired, respectively. The proposed metalens performs well when illuminated with adjacent wavelengths. In the second design, the reflected light is focused when applied with x-polarized light, and when applied with y-polarized light, the reflected light is split into two oblique paths. We believe that the results will provide a new method in light manipulation.
The predecessor of China Optics was China Optics and Applied Optics Digest, which was founded in 1985. At that time, it was the only retrieval journal in the field of optics in China. At the end of 2008, China Optics and Applied Optics Digest was renamed 《中国光学》的前身是1985年创办的《中国光学与应用光学文摘》,当时是国内光学领域唯一的检索刊物。2008年底《中国光学与应用光学文摘》转型更名为《中国光学与应用光学》期刊,刊载内容突破了文摘的限制,正式成为学术刊物。
The lateral displacement between the microlens arrays can realize the rapid deflection of a beam; however, in this process, crosstalk beams will inevitably occur between the microlens units, which will affect the imaging quality of the system. For this reason, we propose a crosstalk elimination design method based on the combination of multilayer stop arrays, establish a simulation model, use a geometric optical object image relationship to trace the characteristic light of a single group of microlenses, analyze the relationship between the structural parameters of the microlens array and the stop array size, and comprehensively discuss the light transmission of the microlens array under various conditions. An example of an infrared system is simulated using the optical design analysis software Fred, verifying the effectiveness of this design method in suppressing the crosstalk beams generated in the dynamic transmission process, ensuring independent propagation between microlens units, and realizing crosstalk-free imaging.
The suppression of residual reflectivity in optical elements has become a hot research topic as it addresses the degradation of optical system imaging quality caused by stray light. Antireflective coatings on the outer surface of window glasses require low reflectivity, high hardness, and resistance to mechanical wear. This study investigates the role of reactive gas stoichiometry in tailoring the structure and performance of antireflection (AR) coatings deposited on GG7i glass via capacitively coupled radio-frequency magnetron sputtering. First, the influence of three / flow ratios on the optical and mechanical properties of films discussed under identical process parameters. Results show that the refractive index, hardness, and surface roughness of the films increase with increasing / ratio and that the stress of the films increases according to the Stoney formula. The wear resistance of the films combined with an antifingerprint (AF) coating is tested using steel wool. Experimental results show that the water contact angle of the AF decreases with increasing surface roughness of the film. Finally, on the basis of a comprehensive evaluation of optical and mechanical properties, the antireflection coating on the outer surface of the window glass was prepared by optimizing the process parameters. At incidence, the average reflectivity from 420 to 680 nm is <1%, the maximum value is <1.2%, the surface hardness is 17.2 GPa, and the water contact angle is after the steel wool wear test, showing its suitability for durable antifingerprint applications. This work provides a strategic pathway for designing high-performance optical coatings with tailored mechanical robustness.