The autonomous chain network formation by multi-robot rescue system is investigated. Chain networks connecting a base station and rescue robots are essential to reconnoiter distant spaces in disaster areas. The chains must be formed to assure communications among them and must be transformed if the target of exploration changes. These formations must be executed by autonomous movements of robots from reliable viewpoints in rescue operations. As the basis of their movements, we adopt autonomous classification of robots into search robots and relay robots. They act according to the behavior algorithms of each class of robot to form chain network threading the path to the distant spaces. The rule of the classification and the behavior algorithm refer forwarding table of each robot constructed for ad hoc networking. The results of simulations show that chain networks are formed and transformed by rescue robots appropriately for their reconnaissance to distant spaces even though three spaces exist beyond different corridors stemming from the safety zone where base station is established.
This paper introduces the concept of an online medical diagnosis system for ubiquitous health care using a wireless ECG sensor. To confirm the feasibility ofthe system, we conducted clinical tests by 67 subjects with a wireless ECG sensor and a Holter ECG monitor simultaneously for comparison purpose. We made five types of evaluations such as analyses on data loss rate, burst data loss length, ECG waveforms comparison, normalized cross-correlation and heart rate variability (HRV) by RR50. The results show that, as long as the sensed data are successfully received at a receiver, the wireless ECG sensor has a comparable performance with the Holter ECG monitor.
This paper investigates the possibility of a realtime electrocardiogram (ECG) data gathering by a wireless vital sensor in houses and hospitals. First of all, to evaluate the ECG capability, we conducted clinical tests with 67 subjects comparing 24-hour data obtained at houses between the wireless vital sensor and a Holter monitor. Secondly, to evaluate the wireless transmission capability, we conducted experiments with 8 subjects in patient rooms at a hospital. The clinical test results conclude that, as long as the sensed data are successfully received at a receiver, the wireless vital sensor has a comparable performance with the Holter ECG monitor, on the other hand, the experimental results show that the data transmission capability with a single receiver is not satisfactory for real-time continuous monitoring, but the use of three receivers can significantly improve the data transmission quality by receive diversity effect.
We are developing an ubiquitous system for constant monitoring of human health that uses a 3D accelerometer and an electrocardiogram communicating wirelessly to a personal computer. The should provide an automatic alert whenever a person's condition indicates a risk of heart attack or other danger. We collected acceleration data and bodily movement records from our staffs and from volunteer in order to determine from the movement data what sorts of movements, such as walking or riding a bicycle, a person is engaging in. Our system is able to infer the type of human movements from the acceleration data and use this in combination with ECG data to decide whether to issue an alert. Recently, we used a threshold method for the estimating what types of movements were being detected. Then we recently improved on our movement estimates by using normalization and the one nearest neighbor method.
25 March 2009 in EURASIP Journal on Advances in Signal Processing
In the motion control of a microrobot swarm, a key issue is how to autonomously generate a set of common coordinates among all robots and how to notify each robot of its heading direction in the generated common coordinates without any special devices for estimating location and bearing. This paper proposes a set of common coordinates and a heading direction generation method for a robot swarm with only received signal strength indicator (RSSI) measured through wireless communications. We explain the principle of the proposed method and show some computer simulation results on the location and direction estimation errors. Finally, we demonstrate some experimental results using a swarm composed of five robots with the IEEE 802.15.4 standard as its wireless communication tool.