20 July 2017 in Journal of Fluid Mechanics
Acoustic fields in a liquid medium can trap and suspend small particles at their pressure nodes. Recent measurements demonstrate that nanorods immersed in these fields generate autonomous propulsion, with their direction and speed controlled by both the particle’s shape and density distribution. Specifically, slender nanorods with an asymmetric density distribution about their geometric centre are observed to move steadily with their low density end leading the motion; particle geometry exerts an equally significant and potentially opposing effect. In this article, we investigate the physical mechanisms underlying this combined density/shape induced phenomenon by developing a simple yet rigorous mathematical framework for axisymmetric particles. This only requires solution of the (linear) unsteady Stokes equations, which can be performed numerically or analytically. The theory holds for all particle shapes, particle aspect ratios (length/width) and acoustic frequencies. It is applied to slender dumbbell-shaped particles and asymmetric nanorods – these provide model systems to investigate the competing effects governing propulsion. This shows that geometric and density asymmetries in the particle generate axial jets that can produce motion in either direction, depending on the relative strengths of these asymmetries and the acoustic Reynolds number (dimensionless frequency). Strikingly, the propulsion direction is found to reverse with increasing frequency, an effect that is yet to be reported experimentally. The general theory and mechanism described here enable thea prioridesign and fabrication of nano-motors in fluid for transport of small-scale payloads and robotic applications.
10 June 2021 in Nano Letters
6 May 2021 in The Journal of Physical Chemistry Letters
3 November 2023 in Journal of Fluid Mechanics
A solid body in a viscous fluid undergoing oscillatory motion naturally produces a steady secondary flow due to convective inertia. This phenomenon is embodied in the streaming flow generated by a sphere in an unbounded fluid executing rectilinear oscillations. We review the considerable literature on this canonical problem and summarise exact and asymptotic formulas in the small-amplitude limit. These analytical formulas are used to explore the characteristic flow structure of this problem and clarify previously unreported features. A single, toroidal-shaped vortex exists in each hemisphere regardless of the oscillation frequency, which can drive a counter-flow away from the sphere. The vortex centre moves monotonically away from the sphere with decreasing oscillation frequency, and engulfs the entire flow domain for $\beta \equiv \omega R^2/\nu < 16.317$ , where $\omega$ is the angular oscillation frequency, $R$ the sphere radius, and $\nu$ the fluid kinematic viscosity. This seemingly abrupt change in flow structure at the critical frequency $\beta _{critical} =16.317$ , and its quantification, appear to have not been reported previously. We perform a direct numerical simulation of the Navier–Stokes equations, to (1) confirm existence of this critical frequency at finite amplitude, and (2) examine its variation with amplitude. This reveals a universal relationship between the critical frequency and oscillation amplitude, clarifying previous reports on the structure of this streaming flow. The critical frequency is shown to be identical for the streaming flow and the cycle-averaged particle paths, establishing that the critical frequency is accessible directly using standard measurements.
24 August 2021 in Nature Communications
Rotational dynamics often challenge physical intuition while enabling unique realizations, from the rotor of a gyroscope that maintains its orientation regardless of the outer gimbals, to a tennis racket that rotates around its handle when tossed face-up in the air. In the context of inertial sensing, which can measure mass with atomic precision, rotational dynamics are normally considered a complication hindering measurement interpretation. Here, we exploit the rotational dynamics of a microfluidic device to develop a modality in inertial sensing. Combining theory with experiments, we show that this modality measures the volume of a rigid particle while normally being insensitive to its density. Paradoxically, particle density only emerges when fluid viscosity becomes dominant over inertia. We explain this paradox via a viscosity-driven, hydrodynamic coupling between the fluid and the particle that activates the rotational inertia of the particle, converting it into a ‘viscous flywheel’. This modality now enables the simultaneous measurement of particle volume and mass in fluid, using a single, high-throughput measurement.
20 May 2022 in Journal of Fluid Mechanics
The flow of an unbounded Newtonian fluid above a flat solid plate, set into motion suddenly with uniform velocity, is a canonical problem investigated by Stokes (On the effect of the internal friction of fluids on the motion of pendulums, Trans. Camb. Phil. Soc., vol. 9, 1851) and Rayleigh (Lond. Edinb. Dubl. Philos. Mag. J. Sci., vol. 21, issue 126, 1911, pp. 697–711). We tackle the same problem but with the fluid replaced by a yield-stress material of finite height with a free surface; the latter ensures both yielded (fluid-like) and rigid behaviour. The interface between the yielded and rigid regions – the so-called ‘yield surface’ – always emerges from the plate at a rate faster than that for momentum diffusion. The rigid region, adjacent to the free surface, is accelerated by the constant yield stress acting at this yield surface. As the velocity of this region increases following start-up, its acceleration climaxes and subsequently diminishes. In this latter period, the thickness of the rigid region increases owing to relaxation of the velocity gradients and the stress. The yield surface eventually collides with the plate in finite time, after which the entire material moves in concert with the plate as a rigid body. Analytical and numerical results are presented that can form the basis for practical applications. This includes the development of a ‘rheological microscope’ to directly detect and measure the yield stress. The analysis focuses on exploring the flow physics of a Bingham material. This is shown to be similar to that of a general Herschel–Bulkley material with shear-thinning or shear-thickening rheology.