1 August 2013 in Journal of Atmospheric and Oceanic Technology
Instrumented, subsurface moorings deployed in the Scotian shelf and slope regions of the North Atlantic provide data in low to moderate flows for a current meter intercomparison. The primary instruments being evaluated are two acoustic Doppler single-point current meters, the Aanderaa Seaguard (SG) and the Teledyne RD Instruments (RDI) Doppler volume sampler (DVS), which are compared against older-generation single-point current meters and acoustic Doppler current profilers. Analysis showed that the root-mean-square (RMS) of the speed difference between concurrent instrument combinations was in the range of 1.0–1.6 cm s−1, which is about 3%–6% of the upper limit of speeds observed at these sites. Best agreement was between the DVS and the nearby Seaguard (RMS speed difference of 1.2 cm s−1), during the shelf deployment, and between the Aanderaa recording current meter 11 (RCM11) and the nearby Seaguard (1.0 cm s−1), during the slope deployment. Speed differences larger than 4 cm s−1 were uncommon, occurring less than 1.5% of the time. Slight overspeeding of one of the Seaguards is traced to an intentional alteration in the instruments' sampling strategy. The DVS compass had a slight meandering tendency that caused it to routinely disagree with other instruments by as much as 15° for hours at a time. The disagreement was random in direction and had no impact on most of the comparisons, but it did produce a 15% smaller magnitude of mean current. Subsequent to this field test, Teledyne RDI redesigned the DVS and replaced the compass with a new sensor.
14 March 2020 in Atmosphere-Ocean
A three-dimensional regional circulation model is used to investigate the internal M2 tide structure in the Strait of Canso located in eastern Nova Scotia, Canada. The embayment, an active shipping port, was found to have M2 baroclinic velocities occasionally reaching 0.15 m s−1 and typically faster than the barotropic tide. An internal tide spatial structure develops, characterized by the first vertical mode, and highly sensitive to the details of stratification. A region near the mouth of the Strait, with a strong cross-bathymetry barotropic flow was identified as the main generating site. The regular “canyon-like” features of the Strait concentrate the energy towards the bottom and head and, under favourable conditions, reflect energy from the head, forming a standing wave. The modelling study found that, although some internal tide is generated year-round, only summer stratification conditions were favourable for standing wave development because of both increased internal energy levels and longer wavelengths capable of transporting the energy farther up the Strait. A balanced internal energy budget for the area highlights a tendency towards local dissipation and enhanced mixing rates. Persistent convection cells and upwelling zones suggest possible impacts on biological activity, sediment, and oil spill dynamics in the region. The findings are validated with current meter and water level observations.