Thin films of -substituted bismuth titanate, (BNT), -cosubstituted bismuth titanate, (BNTV), and -substituted bismuth titanate, (BLT) were fabricated on the substrates by a chemical solution deposition technique. These films possessed random-oriented polycrystalline structure. The BNT film had larger remnant polarization than the BLT film; and coercive field of the BNT film with were 32 μC/cm2 and 126 kV/cm, respectively. Furthermore, substitution improved the value of the BNT film up to 37 μC/cm2 (BNTV film; while the BNTV film had an value of approximately 119 kV/cm which was similar to that of the BNT film. Ferroelectric properties of the Pb-free polycrystalline BNT and BNTV films are comparable with those of conventional Pb-based ferroelectric films like a lead zirconate titanate.
1 October 2007 in Japanese Journal of Applied Physics
Barium titanate ( , BT)—bismuth magnesium titanium oxide [ , BMT] system ceramics were prepared in an ambient atmosphere in order to increase the Curie temperature of BT above . A single perovskite phase was observed for BT–BMT ceramics with BMT compositions less than 50 mol %, and their relative densities were greater than 94%. Synchrotron measured x-ray diffraction patterns revealed that all the cations in the ceramics were homogeneously distributed. The temperature dependence of the dielectric properties revealed that the BT–BMT system ceramics exhibited relaxorlike characteristics with a dielectric maximum temperature as high as for the 0.5BT–0.5BMT ceramic. The apparent piezoelectric constant was 60 pC/N for the 0.4BT–0.6BMT ceramic. Based upon these results, the BT–BMT system shows potential as a new type of lead-free material for high piezoelectric applications.