16 November 2008 in Experiments in Fluids
8 February 2013 in Journal of Fluid Mechanics
Spanwise-periodic roughness designed to excite selected wavelengths of stationary cross-flow modes was investigated in a three-dimensional boundary layer at Mach 3.5. The test model was a sharp-tipped $1{4}^{\circ } $ right-circular cone. The model and integrated sensor traversing system were placed in the Mach 3.5 supersonic low disturbance tunnel (SLDT) equipped with an axisymmetric ‘quiet design’ nozzle at NASA Langley Research Center. The model was oriented at a $4. {2}^{\circ } $ angle of attack to produce a mean cross-flow velocity component in the boundary layer over the cone. The research examined both passive and active surface roughness. The passive roughness consisted of indentations (dimples) that were evenly spaced around the cone at an axial location that was just upstream of the first linear stability neutral growth branch for cross-flow modes. The active roughness consisted of an azimuthal array of micrometre-sized plasma actuators that were designed to produce the effect of passive surface bumps. Two azimuthal mode numbers of the passive and active patterned roughness were examined. One had an azimuthal mode number that was in the band of initially amplified stationary cross-flow modes. This was intended to represent a controlled baseline condition. The other azimuthal mode number was designed to suppress the growth of the initially amplified stationary cross-flow modes and thereby increase the transition Reynolds number. The results showed that the stationary cross-flow modes were receptive to both the passive and active patterned roughness. Only the passive roughness was investigated at a unit Reynolds number where transition would occur on the cone. Transition front measurements using the Preston tube approach indicated that the transition Reynolds number had increased by 35 % with the subcritical wavenumber roughness compared with the baseline smooth tip cone, and by 40 % compared with the critical wavenumber roughness. Based on the similarities in the response of the stationary cross-flow modes with the active roughness, we expect it would produce a similar transition delay.
16 February 2011 in Journal of Fluid Mechanics
Single-dielectric barrier discharge (SDBD) plasma actuators have gained a great deal of world-wide interest for flow-control applications. With this has come the need for flow-interaction models of plasma actuators that can be used in computational flow simulations. SDBD plasma actuators consist of two electrodes: one uncovered and exposed to the air and the other encapsulated by a dielectric material. An AC electric potential is supplied to the electrodes. When the AC potential is large enough, the air in the region over the encapsulated electrode ionizes. The ionized air in the presence of the electric field results in a space–time dependent body force vector field. The body force is the mechanism for flow control. This study describes a semi-empirical model that has been developed to capture the dynamic nature of the local air ionization and time-dependent body force vector distribution. Validation of the model includes comparisons to experimentally measured space–time charge distribution and the time-resolved and time-averaged body force. Two flow simulations are then used to further validate the SDBD plasma actuator model. These involved an impulsively started plasma actuator in still air, and the flow around a circular cylinder in which plasma actuators were used to suppress the Karman vortex street. In both cases, the simulations agreed well with the experiments.
29 March 2021 in Journal of Fluid Mechanics
Experiments were performed using an active flow control approach that has shown the ability to significantly reduce the viscous drag in turbulent boundary layers. The purpose of this work was to document the changes in the turbulence characteristics of the boundary layer with the drag reduction. The flow control involved generating a steady spanwise velocity component of the order of vortical structures, indicate a suppression of coherent features in the wall layer. These results are consistent with an underlying mechanism for drag reduction that comes from a suppression of the turbulence producing events in the wall layer associated with the wall streak structure.
13 April 2011 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
Single dielectric barrier discharge plasma actuators have been used to control flow separation in a large number of applications. An often used configuration involves spanwise-oriented asymmetric electrodes that are arranged to induce a tangential wall jet in the mean flow direction. For the best effect, the plasma actuator is placed just upstream of where the flow separation will occur. This approach is generally more effective when the plasma actuator is periodically pulsed at a frequency that scales with the streamwise length of the separation zone and the free-stream velocity. The optimum frequency produces two coherent spanwise vortices within the separation zone. It has been recently shown that this periodic pulsing of the plasma actuator could be sensed by a surface pressure sensor only when the boundary layer was about to separate, and therefore could provide a flow separation indicator that could be used for feedback control. The paper demonstrates this approach on an aerofoil that is slowly increasing its angle of attack, and on a sinusoidally pitching aerofoil undergoing dynamic stall. Short-time spectral analysis of time series from a static pressure sensor on the aerofoil is used to determine the separation state that ranges from attached, to imminent separation, to fully separated. A feedback control approach is then proposed, and demonstrated on the aerofoil with the slow angle of attack motion.
28 September 2006 in Journal of Fluid Mechanics
A series of experiments were performed to study the absolute instability of Type I travelling crossflow modes in the boundary layer on a smooth disk rotating at constant speed. The basic flow agreed with analytic theory, and the growth of natural disturbances matched linear theory predictions. Controlled temporal disturbances were introduced by a short-duration air pulse from a hypodermic tube located above the disk and outside the boundary layer. The air pulse was positioned just outboard of the linear-theory critical radius for Type I crossflow modes. A hot-wire sensor primarily sensitive to the azimuthal velocity component, was positioned at different spatial ($r,\theta$) locations on the disk to document the growth of disturbances produced by the air pulses. Ensemble averages conditioned on the air pulses revealed wave packets that evolved in time and space. Two amplitudes of air pulses were used. The lower amplitude was verified to produced wave packets with linear amplitude characteristics. The space–time evolution of the leading and trailing edges of the wave packets were followed past the critical radius for the absolute instability, $r_{c_{A}}$. With the lower amplitudes, the spreading of the disturbance wave packets did not continue to grow in time as $r_{c_{A}}$ was approached. Rather, the spreading of the trailing edge of the wave packet decelerated and asymptotically approached a constant. This result supports previous linear DNS simulations where it was concluded that the absolute instability does not produce a global mode and that linear disturbance wave packets are dominated by the convective instability. The larger-amplitude disturbances were found to produce larger temporal spreading of the wave packets. This was accompanied by a sharp growth in the wave packet amplitude past $r_{c_{A}}$. Explanations for this are discussed.