Jae-Yong Hyun

Jae-Yong Hyun

Auto-generated profile, based on publicly available information

Jae-Yong Hyun


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 October 2019 in Journal of Power System Engineering
Verified
Journal Article
Closed access
JHJae-Yong Hyun
Jae-Yong Hyun
MKMinheon Kim
Minheon Kim
KNKi-Woo Nam
Ki-Woo Nam
Using the Ando equation derived by treating as a nonlinear problem for the plastic behavior of fatigue fracture and the Tange equation derived from the El Haddad equation, the fatigue limit and threshold stress intensity factor were determined and the crack length dependence was evaluated. The threshold stress intensity factors were almost identical for the two equations although the basic idea and form of the equations are quite different. The ratio of stress intensity factor/threshold stress intensity factor using the modified Goodman fatigue limit is same for each crack length regardless of the stress ratio. The Tange equation (using α = 1) and the Ando equation were conservatively evaluated due to the decrease in the ratio of stress intensity factor/threshold stress intensity factor as the stress ratio increased at fatigue limit maximum value.

31 August 2019 in Journal of Power System Engineering
Verified
Journal Article
Closed access
JHJae-Yong Hyun
Jae-Yong Hyun
MKMinheon Kim
Minheon Kim
KNKi-Woo Nam
Ki-Woo Nam
In this study, the crack length dependence of the threshold stress intensity factor (△Kth) for semi-elliptical cracks in the finite plate subjected to bending stress was evaluated. (△Kth) of ultra high strength steel (UHS steel) increased sharply at short crack depth and length. Mild steel (M steel) showed a tendency to gently increase at short crack depth and length, compared to ultra high strength steel. That is, different characteristics were shown depending on the material strength. (△Kth) of UHS steel and M steel was constant regardless of the width and crack aspect ratio (As). Regardless of the steel grade and specimen size, (△Kth) of As=0.3 for the crack depth was slightly larger than 1.0. On the other hand, that of As=1.0 for the crack length was much larger than 0.3.