27 March 2006 in Applied Physics Letters
We demonstrate the growth of a low dislocation density, relaxed GaSb bulk layer on a (001) GaAs substrate. The strain energy generated by the 7.78% lattice mismatch is relieved by a periodic array of 90° misfit dislocations. The misfit array is localized at the GaSb∕GaAs interface and has a period of 5.6nm which is determined by transmission electron microscope images. No threading dislocations are visible. The misfits are identified as 90°, rather than 60°, using Burger’s circuit analysis, and are therefore not associated with generation of threading dislocations. A low dislocation density and planar growth mode is established after only 3 monolayers of GaSb deposition as revealed by reflection high-energy electron diffraction patterns. Calculations corroborate the materials characterization and indicate the strain energy generated by the 7.78% lattice mismatch is almost fully dissipated by the misfit array. The low dislocation density bulk GaSb material on GaAs enabled by this growth mode will lead to new devices, especially in the infrared regime, along with novel integration schemes.
15 May 2009 in Journal of Applied Physics
The manuscript reports that the initial strain relaxation of highly mismatched GaSb layers grown on GaAs (001) is governed by the two-dimensional (2D), periodic interfacial misfit (IMF) dislocation array growth mode. Under optimized growth conditions, only pure 90° dislocations are generated along both [110] and directions that are located at GaSb/GaAs interface, which leads to very low threading dislocation density propagated along the growth direction. The long-range uniformity and subsequent strain relaxation of the 2D and periodic IMF array are demonstrated via transmission electron microscopy and scanning transmission electron microscopy images at GaSb/GaAs interface.
16 October 2006 in Applied Physics Letters
The authors demonstrate and characterize type-II GaSb quantum dot (QD) formation on GaAs by either Stranski-Krastanov (SK) or interfacial misfit (IMF) growth mode. The growth mode selection is controlled by the gallium to antimony (III/V) ratio where a high III/V ratio produces IMF and a low ratio establishes the SK growth mode. The IMF growth mode produces strain-relaxed QDs, where the SK QDs remain highly strained. Both ensembles demonstrate strong room temperature photoluminescence (PL) with the SK QDs emitting at 1180nm and the IMF QDs emitting at 1375nm. Quantized energy levels along with a spectral blueshift are observed in 77K PL. Transmission electron microscope images identify the IMF array and crystallographic shape for both types of QD formation. Atomic force microscope images characterize QD geometry and density.
18 August 2008 in Applied Physics Letters
The authors describe simultaneous interfacial misfit (IMF) array formation along with antiphase domain (APD) suppression in highly mismatched AlSb grown on a miscut Si (001) substrate. Strain energy from the AlSb/Si heterojunction is accommodated by a self-assembled two-dimensional array of pure dislocations confined to the interface. The 13% lattice mismatch establishes the AlSb/Si IMF period of . This IMF spacing is well matched to the step length of the miscut Si (001) substrate. Furthermore, the miscut substrate geometry suppresses APD formation due to the double step height. The resulting bulk material has both very low defect density and very low APD density confirmed by transmission electron microscope images. This material is expected to be desirable for electronic III-V devices on Si substrates.
13 January 2005 in Applied Physics Letters
We describe the growth mechanisms of highly mismatched defect-free AlSb on Si(001) substrates. Nucleation occurs during the first few monolayers of AlSb deposition by crystalline quantum dot formation. With continued growth, the islands coalesce into a bulk material with no vertically propagating defects. Strain energy from the interface is dissipated by crystallographic undulations in the zinc-blende lattice, as confirmed by high-resolution transmission electron microscopy (TEM) images. Reciprocal space analysis of the TEM images corroborates a crystallographic rotation associated with the undulations. The resulting AlSb material is relaxed according to x-ray diffraction analysis.
18 April 2011 in Applied Physics Letters
We report on the thermal boundary conductance across structurally-variant GaSb/GaAs interfaces characterized by different dislocations densities, as well as variably-rough Al/GaSb interfaces. The GaSb/GaAs structures are epitaxially grown using both interfacial misfit (IMF) and non-IMF techniques. We measure the thermal boundary conductance from 100 to 450 K with time-domain thermoreflectance. The thermal boundary conductance across the GaSb/GaAs interfaces decreases with increasing strain dislocation density. We develop a model for interfacial transport at structurally-variant interfaces in which phonon propagation and scattering parallels photon attenuation. We find that this model describes the measured thermal boundary conductances well.