The reference optical spectrum (ROS) based in-band OSNR monitoring methods are accurate and inherently robust to fiber chromatic dispersion and polarization mode dispersion. They are also very simple and suitable to be deployed ubiquitously in the transmission system. In this paper a ROS based in-band OSNR monitoring method is proposed for erbium doped fiber amplifier (EDFA) amplified multi-span DWDM systems with cascaded filtering effect (CFE) caused by cascaded add-drop filters or wavelength selective switches. In such system the optical signal as well as the optical noise may experience significant CFE making the ROS based methods proposed before ineffective. The new method solves this problem and performs very well for OSNR in the range of 10-30dB when fiber nonlinear effect and non-ideal filtering effect are present. The OSNR monitor based on the new method is also more convenient to use as only one-time calibration is required when used at different monitoring locations along the optical link.
Management of fixture design knowledge is vital for improving product quality and reducing product lead time, but there is no efficient and effective mechanism in current computer-aided fixture design systems to integrate fixture design process, to share design resource as well as acquisition and reuse knowledge. Ontology is increasingly seen as a key technology for enabling semantics-driven knowledge processing. On the background of a architecture of fixture design system based on knowledge introduced in the paper, we presented and expatiated a fixture design knowledge acquisition and reuse technology based on ontology, which embeds ontology in current computer-aided fixture design based on knowledge. Finally, the related case study was given.
Efficient defect detection and analysis is critical to the success of any fab. For a yield management group, it is essential to capture defects of interest and to eliminate defects that do not impact yield. In a foundry where multiple devices are manufactured, it is crucial to have an inspection strategy that is transferable to many devices. Such a strategy also needs to be effective in capturing the same defect types by process layer. This paper discusses the challenges involved in creating such a strategy and steps taken to successfully combat it through a collaboration between Chartered Silicon Partnership (CSP) and KLA-Tencor (K-T). A KLA-Tencor 2139 brightfield inspection tool was used for defect image capture. Segmented Auto Threshold (SAT), a tool available on the 2139, is used to eliminate nuisance defects during inspection. SAT is a powerful tool, but the inspection recipes can be complex. Another tool on the 2139, AutoSAT, may be used to facilitate creation of such sophisticated inspections. AutoSAT samples defects on the wafer and prompts the user to classify them as real, killer or nuisance. Once this is done, AutoSAT uses a predefined SAT template set to optimize the thresholds to suppress nuisance and enhance critical defect capture. This approach is particularly useful in a foundry environment where the yield management group is faced with a variety of devices, requiring many inspections.