Deformable mirrors are vital components of any adaptive optical system. Considering such a crucial role in compensation of incident wavefront distortions, the main requirements are imposed on these elements that determine performance of the entire system. To correct for phase distortions in high-power laser complexes a stacked-actuator deformable mirror with water cooling was developed. The main characteristics of the mirror, such as the initial surface profile (flatness), response functions of the actuators, maximal stroke, and amplitude-frequency characteristics are presented in this paper. Experimental investigations of the proposed cooling method of the mirror surface through actuators were performed.
This paper presents an adaptive optical system intended for focusing the radiation of powerful processing lasers. The system consists of a wave-front corrector, a wave-front meter, and a software-hardware system for controlling the corrector. A flexible bimorph mirror is used as a corrector. An M2 sensor is used to analyze the radiation-focusing quality, making it possible to estimate such parameters of the laser radiation as the diameter, the divergence angle, and the quality parameter M2. The bimorph mirror is controlled by means of a combined method, based on gradient methods of searching for the extremum and a genetic algorithm. The system makes it possible to correct low-order aberrations and to estimate the focusing efficiency of the laser radiation.
This paper discusses the novel adaptive optical closed loop system with bimorph mirror as a wavefront corrector and Shack-Hartmann wavefront sensor to compensate for the aberrations of the laser beam occurred during the distribution of the beam from laser to processed material. Adaptive system can correct for the low-order aberrations in the real-time - the frequency of corrected aberrations is less than 25 (30) Hz. The amplitude of such aberrations - about 7 microns. These parameters are mostly determined by utilized Shack-Hartmann wavefront sensor. Number of corrected aberrations - up to 15th Zernike polynomial (excluding tip-tilt).
We present an adaptive optical closed loop system to obtain a good focused beam. A bimorph mirror is used as a wavefront corrector and CCD camera at the focal plane of the lens is a sensor. Such adaptive system can correct for the low-order wavefront aberrations without any sophisticated wavefront sensors.