The synchronous reluctance machines with transversally laminated rotor and multi flux-barriers per pole reach a high torque density, so that they are proposed as a valid alternative to permanent magnet machines. Such machines have been analyzed for different applications, mainly home appliance, industrial tool, traction, up to low-speed high-power generators. On the contrary, the use of synchronous reluctance machines for high-speed applications remains almost unexplored yet. The aim of this paper is to investigate the potential of a high-speed synchronous reluctance machine. An optimization is carried out to maximize the machine performance at a given speed. The machine size is fixed and the focus is on the rotor geometry, with the purpose of maximizing the electromagnetic torque, according to the necessary thickness of the ribs. It is shown that, even if the ribs are thick, it is possible to reach a proper torque density. It is shown that different solutions exist, which allow to reach high torque and minimum torque ripple. However, the optimal solutions are quite sensitive to the geometrical variations, so that a particular care is required in the manufacturing of the machine. Finally, the power limit of the synchronous reluctance motor with barrier rotor is found.
8 May 2017 in IEEE Transactions on Industry Applications
This paper deals with a detailed geometry analysis of the rotor structure for both synchronous reluctance and permanent magnet (PM)-assisted reluctance motor in order to suggest an automatic procedure to design the rotor structure. The shape of flux barriers is selected to achieve both high d-axis inductance and low q-axis inductance to obtain high output torque and high power factor. Methods to properly design the geometry of the ends of each barrier and PMs are adopted. In order to draw a rotor with proper shape, different modifications are discussed. All details are described to allow any reader to adopt the same procedures. After that, such a procedure is used to rapidly analyze the impact of some geometry changes on the machine performance to give a design guideline. The analyzing process starts from a reluctance motor considering the number of barriers, insulation ratio, split ratio, and slots per pole per phase. Then, the PMs are inset into flux barriers and the effect of PM width on torque, power factor, and flux weakening capability is investigated. At last, the demagnetization limit under overload operations is analyzed.
14 December 2018 in IEEE Transactions on Industry Applications
A criteria to design the rotor of multi flux-barrier synchronous reluctance machines is proposed. In particular, the focus will be on the proper design of flux-barriers geometry. An analytical model is adopted to compute the impact of the rotor flux-barriers on the torque, focusing on the torque ripple. Thanks to proper assumptions, the analytical model is simplified so as to highlight the main causes of torque ripple. Such an analytical model allows to derive the angles of the flux-barrier ends corresponding to the minimum torque ripple in a closed form. This result has never been presented in the past literature and it represents a useful tool as far as the motor design is concerned. Rotors with one, two and three flux-barriers per rotor pole are taken into account. However, the advantageous analytical model can be extended to any number of flux-barriers per pole. Some examples referring to 4-pole synchronous reluctance machines with different numbers of stator slots are investigated and illustrated. The results are compared with a full-featured analytical model and validated through finite element simulations.
1 March 2018 in IEEE Transactions on Energy Conversion
Synchronous reluctance machine has high flux density fluctuations in the iron due to the high harmonics results from the rotor anisotropy. Thus, an accurate computation of the iron losses is of paramount importance, especially during the design stage. In this paper, a non-linear analytical model considering the magnetic iron saturation and the slotting effect is proposed. The model estimates accurately the iron losses at a wide range of operating speed. In addition, the accuracy of the non-linear model when the machine is highly saturated, i.e. when it works along the MTPA trajectory, is presented and verified. The model presented is general and can be applied to other configurations. A 36-slot four-pole machine, with three flux-barriers per pole is considered as a case study. Finite element analysis is used to validate the results achieved by means of the non-linear analytical model. Furthermore, an experimental setup is built to validate the simulation results.
30 August 2017 in IEEE Transactions on Industry Applications
This paper deals with an analytical model of reluctance synchronous motor, able to consider both stator slotting effect and magnetic saturation in the stator and rotor iron paths. It joints the field distribution at the air gap to a lumped-parameter magnetic network. Local saturation factors are defined so as to adjust the flux-density distribution. The analytical approach exhibits great potentiality, since it is a formulation based on an harmonic study, and it is easily adaptable to any motor geometries. As an example, 36-slot 4-pole machine is analyzed, considering three flux barriers per pole. Finite element analysis confirms the results achieved by means of the analytical model.
20 February 2018 in IEEE Transactions on Energy Conversion
The synchronous reluctance motor works under heavy saturation. This paper presents a nonlinear analytical model of the reluctance machine, which is used to derive both average and torque harmonics as a function of the rotor geometry. Maps showing the torque harmonics as a function of the rotor barrier angles are derived. These maps are useful tools for the machine designer to get a proper rotor geometry. The torque maps are compared with those obtained from both linear analytical and finite element models. The maps computed analytically show good agreement with those derived by means of finite element analysis, and they are obtained in a much smaller computing time.