Muyiwa Abiodun Okusanya

Muyiwa Abiodun Okusanya

Auto-generated profile, based on publicly available information

Muyiwa Abiodun Okusanya

Federal Polytechnic, Ilaro, Ogun State, Nigeria

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2021 in Turkish Journal of Agricultural Engineering Research
Verified
Journal Article
Open access
MOMuyiwa Abiodun Okusanya
Muyiwa Abiodun Okusanya
SOSamel Oluwagbayide
Samel Oluwagbayide
COChristopher Bamidele Ogunlade
Christopher Bamidele Ogunlade
The techniques used in processing cat fish in developing economies of the world are not without several drawbacks. The most prominent is traditional method and this has been known to generate high levels of polycyclic aromatic hydrocarbons (PAHs). In addressing the problems faced by processors in the industry, a fish smoker of 50 kg capacity that derives its power from dual heat sources (charcoal and gas) was designed, fabricated, and evaluated. The smoking time was evaluated on the heat sources with and without the use of a suction blower. The fish had a smoking (retention) time of 4 hours when it was processed without the suction blower while the retention time decreased from 4 hours to 3 hours when the suction blower was used. The suction blower also has a significant impact on the moisture content on dry basis (MC d.b.). The MC d.b. values of smoked fish when suction blower was used with charcoal and gas for 4 hours duration were 10.45% and 11.76%, respectively. Without blower, the values were 14.3% and 11.70%, respectively. The processed smoked fish produced was hygienic, not likely to exceed maximum limits of PAHs allowed by the United States Environmental Protection Agency since materials used are stainless steel and the heat sources used were indirectly introduced into the smoking chamber. Hygienic processing and practices of smoked fish and products can ensure food safety in our society.

15 June 2023 in Turkish Journal of Agricultural Engineering Research
Verified
Journal Article
Open access
PDF file
MOMuyıwa OKUSANYA
Muyıwa OKUSANYA
FAFrancis Agbongi̇aban
Francis Agbongi̇aban
Nutrients from fruits are lacking in most African diets despite their importance. This results in malnutrition and diseases. Some of the factors responsible for these dietary deficiencies are income level and technologies to address postharvest losses. A hand-operated screw juicer was developed in this technical brief to address some of the problems. The machine developed uses screw principle for fruits mastication and juice extraction. The screw juicer performance was tested based on extraction capacity, efficiency and number of runs. Bivariate linear regression was the statistical model used to understand the relationship between the explanatory variable, x (number of pass/runs) and the response variable, y (extraction capacity/efficiency). For orange, cucumber, pineapple, golden melon and watermelon, the efficiencies (%) are respectively 79.30, 48.68, 68.96, 56.41 and 56.52 at single pass. Also, the extraction capacities of the machine (L h-1) are respectively 6.38, 5.08, 9.16, 7.84 and 10.48 for the fruits. The efficiencies are higher with orange and pineapple due to fibrous nature of the fruits. Pineapple and watermelon gave higher extraction capacity due to higher water content and juicy nature, at 5 and 7 runs respectively. The model (Y = -49.29X1 + 295.71 ± 89.75) from the analysis using watermelon reveals machine extraction capacity in volume is a function of number of runs. The machine reached its highest extraction capacity of 10.48 liters in 1 hour at 7 runs. This extraction capacity makes the machine fit to meet daily dietary requirements (400 g per person, an equivalence of 380 ml) of more than 4 households if operated for one hour. The machine can be adopted for use by small scale processors as it is affordable, less stressful and easy to maintain.

1 January 2023 in Turkish Journal of Agricultural Engineering Research
Verified
Journal Article
Open access
PDF file
MOMuyiwa Abiodun Okusanya
Muyiwa Abiodun Okusanya
COChristopher Bamidele Ogunlade
Christopher Bamidele Ogunlade
SOSamel Oluwagbayide
Samel Oluwagbayide
Plastic pollution is a problem that is affecting many aspects of human endeavour. Searches are being made for ecofriendly alternatives and waste management practices that can lessen the impact of plastic pollution. On the list are waste plastic reuse, use of bioplastics, reduction of reliance on plastic usage, and plastic waste recycling. In this technical brief, a Plastic shredder was developed to recycle plastic waste in the value chain. Plastic shredder is a machine that turns used plastic bottles to smaller particle sizes to enhance portability, easiness and readiness for use into new products. While in operation, the prime mover drives the transmission shafts with low speed in the range of 25 to 65 rpm to give shredding torque that masticates materials fed in, into desired granular size. Bivariate Linear regression was the statistical model used to understand the relationship between the two variables of evaluation, the predictor x (speed) and the response variable y (shredding capacity). Since significance F (0.0216) is less than 0.05, there is 95% confidence that there is linear relationship between speed of rotation and shredding capacity of the machine. Model equation is therefore given as Y= 0.952 X1 – 11.725 ± 2.53. The machine respectively gave highest shredding capacity for PET bottles, Tin can and wastepaper as 56.52 kg h-1, 29.60 kg h-1 and 42.09 kg h-1 at optimum speed of 65 rpm. If operated for 8 hours in a day, it can favorably shred almost half a ton of plastic bottles (452.16 kg day-1). The machine was developed at an affordable cost of $817.72. The paper shredded with the machine can be pulped and made into poultry egg crates and paper print used in building industry. The machine is less stressful to operate and economical to run and maintain. If the machine is widely adopted, the menace caused by nonbiodegradable materials like plastic will be ended.

13 June 2026 in Journal of Agriculture, Aquaculture, and Animal Science
Verified
Journal Article
Open access
MOMuyiwa Abiodun Okusanya
Muyiwa Abiodun Okusanya
SOSamuel Dare Oluwagbayide
Samuel Dare Oluwagbayide
JAJoshua Olatunji Akintade
Joshua Olatunji Akintade
POPhebe Oluwatoyin Okusanya
Phebe Oluwatoyin Okusanya
The ban on the importation of chicken products in Nigeria has led the country to focus more on the production of broilers, thereby putting pressure on the existing hatcheries. Some of the locally developed incubators are found to be ineffective in providing a uniform temperature, humidity, and egg-turning frequency, thereby leading to poor hatchability and increased embryo mortality. This paper proposes the design, development, and performance evaluation of a smart incubator and hatcher with IoT technology for improved hatchability. The proposed system consists of a temperature control unit for the incubation chamber, which can hold up to 352 eggs, a humidity control unit, an egg-turning unit, and a hatching unit. A quadratic model using response surface methodology (RSM) was created to estimate hatchability as a function of temperature, humidity, airflow rate, and egg-turning frequency. Optimum hatchability of approximately 90.5-95% was estimated at a temperature of 37.6°C, humidity of 58%, airflow rate of 0.6 m/s, and seven turns per day. R² value > 0.9 indicates excellent agreement between observed and predicted values. Experimental validation with a few samples gave a hatchability of 85% under optimum conditions. Temperature stability of ±0.3°C and humidity of ±3% were attained in the system. These results show the reliability of the model. This technology provides a green technology solution with a positive impact on the environment and the Nigerian poultry industry. It is a cost-effective technology with a high cost-benefit ratio of 2.7:1 and a total investment of ₦ 292,800 in the incubator. It can be easily adopted by small-scale farmers with quick returns on investment due to increased hatchability and decreased production costs.

22 January 2023 in Turkish Journal of Agricultural Engineering Research
Verified
Journal Article
Open access
PDF file
FAFrancis Agbongi̇aban
Francis Agbongi̇aban
MOMuyıwa OKUSANYA
Muyıwa OKUSANYA
Maize is a popular food crop of the world. After harvest, maize is shelled traditionally by small holders of farms. This method has not proved to be effective due to drudgery attached, kernel breakage and poor shelling capacity. Over time, motorized shellers have been introduced to address the challenges faced by processors; they have not gained widely adoption due to unaffordable cost of owning one. There is the need to design a cost effective and eco-friendly solution that will suit the need of subsistence farmers in the industry. This work focuses on development of a hand-operated maize sheller. A major component is the lever arm fitted to a ball bearing to transfer rotational motion to stripping chute. The machine uses the principle of abrasion to shell maize. Model (Y=54.92+ 0.248 X1-2.68 X2 ± 1.187) obtained from evaluation reveals that shelling capacity is a function of two predictors, speed (X1) and moisture content (X2). For every unit increase in cranking speed at a particular moisture content (23.2%, 18.5% or 14%) shelling capacity increases considerably. When the experiment is run at much lower moisture content (18.5%) shelling capacity increases significantly. The machine reached highest shelling capacity (60 kg h-1.) at lowest moisture content (14%) and highest speed (120 rpm). The machine was developed at affordable cost of $61. Shelling efficiency is also a function of speed and moisture content at which it is processed. For this condition, maximum shelling efficiency is achieved at lowest moisture content possible (14%) and terminal speed of 80 rpm. Mechanical damage resulted when the speed and moisture content are inconsiderably high. The machine is suitable for use by small and medium scale processors; it can efficiently replace the manual shelling methods as it is affordable, less stressful and easy to maintain.