18 March 2024 in IEEE Transactions on Electron Devices
This article addresses the challenge of achieving extended pulse widths in high-power microwave sources operating in long-pulse accelerators. Through modifications and improvements to the transit-time oscillator (TTO) structure, including a high- ${Q}$ modulation cavity, angled corners, a four-cavity extraction structure, and an internally extracted microwave output, the device’s pulsewidth was successfully increased from 42 to 68 ns. Experimental results confirmed the effectiveness of these enhancements, enabling the generation of a 1.03 GW microwave output at a frequency of 12.4 GHz. This study provides valuable experimental results for the development of high-power microwave sources and serves as a reference to advance research and applications in related fields.
1 September 2022 in Physics of Plasmas
In order to make the high-power microwave sources packaged with a permanent magnet more compact and miniaturized, we design a novel compact and lightweight permanent magnet package based on a C-band coaxial transit time oscillator. Before conducting the microwave generation experiment, research on the emission and transmission is carried out. In the beam transmission experiment, when the compact and lightweight permanent magnet is applied, the transmission efficiency in the diode is only 68.1%, while a phenomenon of side emission of electron beams is observed. When a solenoid is used, no side emission occurs. We theoretically analyze this experimental phenomenon and conclude that the radial magnetic field generated by the permanent magnet aggravates the side emission on the surface of a cathode holder. To solve this problem, a novel diode with a gradient cathode holder is proposed. In the beam transmission experiment using the compact and lightweight permanent magnet, this diode can suppress the side emission of electron beams, and the transmission efficiency in the diode is increased to 80.7%. The potential of the diode proved to work efficiently with this permanent magnet package, laying the foundation for the experimental research of microwave generation with this permanent magnet.
1 August 2022 in Physics of Plasmas
Compactness and miniaturization are important development directions of high-power microwave sources at present. In the previous simulation research, we proposed a compact C-band transit-time oscillator with a low external guiding magnetic field. In order to verify whether the device can be better applied to practice, we have carried out experimental research on the device. With a diode voltage of 570 kV, current of 11.5 kA, and external guiding magnetic field of 0.35 T, the output microwave pulse of 1.3 GW is obtained at 4.3 GHz. The power conversion efficiency is about 20%. By observing the fluorescent screen imaging and the far-field pattern in the experiment, it can be seen that the working mode of the device is relatively stable. The experimental results show that the device has the ability to output GW-level C-band high-power microwave under a low external guiding magnetic field.
23 May 2025 in IEEE Transactions on Electron Devices
With the increasing practical demands, research on the lightweight and miniaturization of high-power microwave (HPM) sources holds significant practical importance. Building upon a distributed electron beam focusing system (DEBFS), we present a compact X-band transit-time oscillator (TTO) that achieves a remarkable reduction in guiding magnet weight, from hundreds of kilograms in conventional permanent magnet (PM) configurations to merely 5.67 kg. Addressing the characteristics of this system, which produces a low guiding magnetic field and a short uniform magnetic field region, this article conducts a detailed study on the design of the beam-wave interaction area. To enhance the efficiency of the device, methods such as incorporating a cathode focusing structure and using opening foils are proposed. Additionally, the optimal length of the modulation cavity is investigated. Particle-in-cell (PIC) simulation methods are utilized to study the microwave generation capability of the device. Under conditions of a diode voltage of 410 kV and a current of 7.0 kA, the device outputs microwave power of 1.17 GW at a frequency of 8.00 GHz, with a beam-wave conversion efficiency of approximately 40.76%. The distributed magnet is finally fabricated, and measurements are taken to verify that its magnetic field configuration is consistent with simulations. This research achieves efficient microwave output from the TTO with a guiding magnet weight of 5.67 kg, providing a novel technical approach for the miniaturization of HPM sources.
1 July 2024 in Physics of Plasmas
In order to achieve the objectives of compactness and miniaturization in high-power microwave systems, along with reducing system energy consumption, this paper presents a design of a compact coaxial distributed intense relativistic electron beam (IREB) focusing system based on the transit time oscillator. The design methodology integrates theoretical analysis with a 2.5-dimensional particle simulation method. The entire IREB focusing system is composed of three sets of distributed magnetic rings and front-end focusing structures. The layout of this magnetic system is optimized based on periodic permanent magnets, leading to the formation of a quasi-trapezoidal wave magnetic field configuration. This optimization reduces the required number of magnetic rings while ensuring the efficient transmission of the IREB. To prevent the breakdown of the loaded magnetic rings and to optimize the radial electric field in the diode region, an additional front-end focusing structure was added. Based on the aforementioned structural configuration, a 100% electron beam transmission rate was achieved within a 150 mm range.
1 February 2023 in Physics of Plasmas
In this paper, a novel high-efficiency L-band Metamaterial Relativistic Oscillator (MRO) with high input and output power under relatively low guiding magnetic field has been proposed. In order to increase the power level while decreasing the guiding magnetic field, through our theoretical and simulation investigations on previously designed metamaterial (MTM) structure, we found that the thickness of the ring and the length of the drift tube are the two key factors that can improve the power handling capacity of the MTM structure and field uniformity. Through transmission analysis and electron conductance calculation of the novel MRO based on the improved MTM structure, preliminary MRO design is done. Within CST particle simulation of the proposed MRO and after optimizations, we computationally got a pure 718 MW TE10 output signal at 1.49 GHz using a pulsed electron beam with energy of 700 keV and current of 2 kA under 1 T guiding magnetic field, and the corresponding conversion efficiency is 51.3%. Relevant results of particle simulation verified the previous high frequency analysis. A comparison between our proposed MRO and the previous one reveals that while keeping the high efficiency and miniaturization merits of MRO, the power handling capacity has been increased and the novel MRO works more stable under low guiding magnetic field.