1 February 2023 in International Journal of Optics
In the paper, we applied the customized AI module to the OTDR device and, combined with the optical power monitoring module, realized the AI-assisted optical network fault location mechanism for the high-density interconnection scenario of data centers. The mechanism can make full use of the data from optical links. Based on the link data, the AI module can predict the links that may fail, and then the target links will be monitored by the optical power module. The mechanism can quickly locate and respond to faulty links. Through the test, the introduction of an AI model can improve the average fault detection efficiency of the link by 98.41%.
20 March 2023 in IEEE Photonics Journal
An artificial intelligent neural network improved particle swarm optimization algorithm is proposed for the inverse design of semiconductor optical amplifier. Seven input parameters, current-gain curve and saturation output power curve are selected to form the data set based on the physical model of semiconductor optical amplifier. The effectiveness of forecasting performance is improved by contrasting two back propagation neural network techniques (Scaled Conjugate Gradient and Levenberg-Marquardt) and operational settings (Central Processing Unit and Graphics Processing Unit). Higher accuracy is achieved through feedback analysis of neuron number optimization and test error. The addition of a unique backpropagation neural network can make the fitness of particle swarm algorithm mostly converge below $2\times 10^{-4}$ . The relative difference between original performances and inverse predictions is close to 0%, which proves the effectiveness of parameter extraction. This method can take advantage of neural networks to improve accuracy and speed of particle swarm optimization algorithms for efficient semiconductor optical amplifier inverse design and multi-solution analysis.
24 September 2021 in IEEE Transactions on Instrumentation and Measurement
This article proposes an integrated high-sensitivity temperature sensor based on SiO 2 -asymmetric Mach–Zehnder interferometer (AMZI) and thermal-expansion-induced stress of aluminum-SiO 2 . Mechanical analysis of this structure is carried out. The result shows that the SiO 2 chip is compressed, and the waveguide length is decreased, leading to the central wavelength shift of the sensor. The sensitivity of the sensor can be customized by different arm lengths of the AMZI. The chip is fabricated using a standard planar lightwave circuit (PLC), and the aluminum alloy plate is glued to the chip using $\alpha $ -cyanaloc acrylic resin adhesive. The sensitivities of two sensors with different arm lengths are tested. The test results show the sensitivity reaches 6.86 and 54.2 nm $\cdot \text{K}^{-1}$ , respectively, which coincides with the theoretical analysis. With low cost and customizable sensitivity, this new device is applicable in many fields.
7 January 2023 in Optical and Quantum Electronics
18 June 2025 in Journal of Lightwave Technology
Self-homodyne coherent detection, which meets the transmission requirements of short-reach communication scenarios such as data center interconnects, is limited by carrier fading in the local oscillator (LO) branch and high-power consumption in the digital signal processing (DSP) unit. To address the aforementioned challenges, a comprehensive optimization mechanism is proposed $-$ A polarization control method based on Kalman filter is proposed to address the carrier fading issue; A modulation-format-independent, one-step compensation scheme for polarization demultiplexing and carrier phase recovery based on extended Kalman filter is proposed to mitigate the issue of high-power consumption in DSP. To the best of our knowledge, it is the first time using the Kalman filter for polarization control in the optical domain. The effectiveness of the proposed comprehensive optimization mechanism is validated under both linear and random polarization drift models. The results demonstrate that the proposed polarization control method offers advantages in stabilization performance, convergence speed, and adaptivity. Under the constraint of the adaptive polarization controller, the proposed scheme ensures that the system's bit error rate remains below the forward error correction threshold after 10km of fiber transmission, even with a rotation of the state of polarization (RSOP) of 100 krad/s. Furthermore, the proposed Joint-extended Kalman filter (J-EKF) scheme demonstrates lower power consumption and enhanced tolerance to broad linewidth lasers.