4 November 2019 in IEEE Access
Reversible logic has 100% fault observability meaning that a fault in any circuit node propagates to the output stage. In other words, reversible circuits are latent-fault-free. Our motivation is to incorporate this unique feature of reversible logic to design CMOS circuits having perfect or 100% Concurrent Error Detection (CED) capability. For this purpose, we propose a new fault preservative reversible gate library called Even Target - Mixed Polarity Multiple Control Toffoli (ET-MPMCT). By using ET-MPMCT, we ensure that the evenness/oddness of applied 1's at input, is preserved at all levels of a circuit including output level unless there is a faulty node. A single fault always destroys the parity of input at the output. Our design strategy has two steps for a given function: 1) implement the function with our proposed reversible ET-MPMCT gate library; and 2) apply reversible-to-CMOS gate conversion. For the first step, we propose two approaches. For our first approach in step 1, we first need to have a reversible form of the given function if it is irreversible. Then, synthesize the reversible function using Mixed Polarity Multiple Control Toffoli (MPMCT) gate library by conventional reversible logic synthesis techniques. Finally, the synthesized circuit is converted to ET-MPMCT constructed circuit which is fault preservative. Our second approach, is an ESOP - Exclusive Sum of Products - based synthesis approach modified for our proposed fault preservative ET-MPMCT gate library. It does work with both irreversible and reversible functions. We synthesize our circuits with both approaches in step 1 and choose the circuit with lower number of reversible gates to be fed to step 2 of our design strategy. In second step of our design strategy, we convert our fault preservative reversible circuits into their CMOS counterparts. The performance of our designs is compared with other CED schemes in the literature in terms of area, power consumption, delay and detection rate. Simulations are done with Cadence Genus tool using TSMC 40nm technology. Clearly, results are in favor of our proposed techniques.
30 November 2018 in IEEE Access
Unlike conventional CMOS circuits, reversible circuits do not have latent faults, so faults occurring in internal circuit nodes always result in an error at the output. This is a unique feature for online or concurrent fault tolerance and the main motivation of this study with an aim of achieving highly efficient fault-tolerant CMOS logic circuits. For this purpose, we first implement fault-tolerant reversible circuits.We develop two techniques to make a reversible circuit fault-tolerant by using multiple-control Toffoli gates. The first technique is based on single parity preserving, and offers error detection for odd number of errors at the output. The second technique is constructed on Hamming codes that results in circuits detecting any number of errors unless the number of errors at the output is the order of d, or correcting (d–1)=2 bit errors where d is the minimum Hamming distance between any pair of bit patterns. We select d = 3 in this study. We also claim that 100% error detection is possible with conservative reversible gates such as a Fredkin gate. For this purpose we develop a greedy synthesis algorithm that implements an arbitrary reversible function with multiple-control Fredkin gates. As the next step, we utilize the proposed reversible circuits with conventional CMOS gates. This certainly approves the practical use of the proposed techniques. The effectiveness of our techniques is demonstrated on benchmark circuits, implemented by both reversible and CMOS gates, in terms of fault tolerance performances and area costs. Comparisons with the related studies in the literature as well as with dual modular redundancy and triple modular redundancy based circuits clearly favor the proposed designs.
9 July 2025 in ACM Transactions on Design Automation of Electronic Systems
Approximate circuits have become ubiquitous in error-resilient applications. These circuits provide large reductions in area, power, and delay at the cost of erroneous computations. The error-resilient applications produce acceptable output quality, even after the introduction of erroneous computations. However, we observed that the error resilience of an application varies widely with respect to the applied inputs. Since prior works have mostly focused on using samples from a uniform distribution while designing the approximate circuits, they are unable to exploit input aware properties to design optimal circuits. Hence, in this work, we bridge this gap and propose Formally Verified Library of Input Data Aware Approximate Circuits (FV-LIDAC). FV-LIDAC is the first formally verified library of input distribution aware approximate arithmetic circuits. We use three of the most widely occurring distributions, namely uniform, normal, and exponential distributions, to show that optimal design sets are heavily dependent on the input data. FV-LIDAC chooses the best designs among millions of functional approximated adder and multiplier circuits, depending upon the inputs. Since there are no existing input-aware approximate circuit libraries, we compared FV-LIDAC against state-of-the-art input-unaware EvoApproxLib, to further highlight the need for FV-LIDAC. Additionally, we perform case studies on real-world applications to further highlight the improvement over state-of-the-art. We aim to make the Pareto-optimal designs available as open source to stimulate further research.
30 September 2024 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Recent studies have revealed that laser-based side-channel analysis (SCA) attack methods, particularly optical probing (OP), pose a serious threat to the security of integrated circuits (ICs). State-of-the-art countermeasures focus mainly on approaches in the domain of circuit design to mitigate the OP attack. However, methods to analyze OP, which can be integrated into the tool flow during design time, are scarce. Consequently, the actual robustness against OP can only be evaluated during post-fabrication, which may require a redesign of the IC and result in huge costs. To mitigate the lack of such methods and tools, we introduce OPTI-Sim. OPTI-Sim is an OP analysis framework, enabling designers to explore the circuit’s susceptibility against OP during design time. As OPTI-Sim allows the study of the vulnerability of the circuits against OP attacks prefabrication, it has immense potential to reduce design time and production costs of security-relevant ICs. OPTI-Sim enables an automated OP analysis at the layout level by reading layout files, performing logical computations to retrieve the state of each logic cell in the design, and performing OP analysis. The applicability of OPTI-Sim is explored by designing and evaluating a cell library and exemplary circuits that are robustified against OP attacks. Another feature of the proposed framework discussed in this work is its ability to explore the detection of hardware Trojans (HTs) using OP. HT detection using OP omits the need to have access to the golden chip to expose the HT, and results in a 100% HT detection rate. Furthermore, to the best of our knowledge, OPTI-Sim is the first OP framework of its kind.
11 December 2024 in IEEE Embedded Systems Letters
In this work, for the first time, we propose a security evaluation framework, namely Auto-OPS, that automates performing the Optical Probing (OP) attack in simulation on a full GDS-II design file. Auto-OPS empowers designers by automatically extracting the active regions geometry model of each logic cell in the standard cell library or custom-designed logic cells to evaluate the security robustness of a design. Auto-OPS enables scaling up of the current OP evaluation environments which rely on manual extraction of active regions which is an error-prone and cumbersome procedure. Additionally, we evaluated and demonstrated the performance of our framework on several benchmark circuits GDS-II files designed using an open-source 45nm standard cell library.
1 November 2024 in Microprocessors and Microsystems