Piezoelectric ceramics are widely employed in electromechanical coupling components such as sensors, actuators, and transducers owing to their excellent performance, cost-effectiveness, versatile shapes and configurations, and generous chemical/functional tuneability. However, most piezoceramics contain a significant amount of hazardous and toxic element, Pb, which is considered unsustainable. Although more environmentally friendly, Pb-free counterparts have been developed, production of both Pb-containing and Pb-free piezoceramics still demands high energy consumption. On the other hand, retired and rejected piezoceramics are not properly recycled, leaving a large ecological footprint behind the piezoelectric industry. Thus, there is a need for proper recycling methods which give wasted piezoceramics a second life at only a marginal energy cost, so that the energy and environmental footprints are minimized before the piezoceramics are permanently disposed. This work demonstrates the fabrication and use of oxide halide perovskite composites to recycle piezoceramics. The composites consist of oxide perovskite piezoceramic particles as the fillers that mimic crushed/recycled piezoceramics and an organometal halide perovskite, PTMA-CdCl3 (PTMA is C6H5N(CH3)3), as the matrix/binder. The composites consume only about 1% of the energy budget required for making new equivalent piezoceramics whilst retaining comparable capabilities for sensing applications. The results suggest that such a recycling method is transferrable to a broad range of piezoceramics and provides an incentive to possibly extend the method towards simultaneously recycling halide perovskite solar cells in the future.
Global concerns over energy availability and the environment impose an urgent requirement for sustainable manufacturing, usage, and disposal of electronic components. Piezoelectric and photovoltaic components are being extensively used. They contain the hazardous element, Pb (e.g., in widely used and researched Pb(Zr,Ti)O3 and halide perovskites), but they are not being properly recycled or reused. This work demonstrates the fabrication of upside‐down composite sensor materials using crushed ceramic particles recycled from broken piezoceramics, polycrystalline halide perovskite powder collected from waste dye‐sensitized solar cells, and crystal particles of a Cd‐based perovskite composition, C6H5N(CH3)3CdBr3xCl3(1–x). The piezoceramic and halide perovskite particles are used as filler and binder, respectively, to show a proof of concept for the chemical and microstructural compatibility between the oxide and halide perovskite compounds while being recycled simultaneously. Production of the recycled and reusable materials requires only a marginal energy budget while achieving a very high material densification of >92%, as well as a 40% higher piezoelectric voltage coefficient, i.e., better sensing capability, than the pristine piezoceramics. This work thus offers an energy‐ and environmentally friendly approach to the recycling of hazardous elements as well as giving a second life to waste piezoelectric and photovoltaic components.
The ability to tailor the electronic band structure and optical absorption by appropriate cationic substitution in perovskite oxide ferroelectrics is essential for many advanced electronic and optoelectronic applications of these materials. Here, we explored weak (Ba,Ni)-doping for reducing optical bandgaps in (K,Na)NbO3 ferroelectric films and ceramics. The optical absorption in the broad spectral range of (0.7–8.8) eV was investigated in polycrystalline doped, pure, and oxygen deficient films, in doped epitaxial films grown on different substrates, and in doped ceramics. By comparing optical properties of all films and ceramics, it was established that 1–2 at% of cationic substitutions or up to 10 at % of oxygen vacancies have no detectable effect on the direct (∼4.5 eV) and indirect (∼3.9 eV) gaps. Concurrently, substantial sub-gap absorption was revealed and ascribed to structural band tailing in epitaxial films and ceramics. It was suggested that owing to fundamental strain-property couplings in perovskite oxide ferroelectrics, inhomogeneities of lattice strain can lead to increased sub-gap absorption. The uncovered structurally induced sub-gap optical absorption can be relevant for other ferroelectric ceramics and thin films as well as for related perovskite oxides.
The theoretical role of filler permittivity in the properties of upside-down composites with high filler content is experimentally validated, promoting the upscaling of recycled piezoelectric ceramics for a second life in sensing devices.
Energy harvesting applications demand high-performance piezoelectric materials that combine excellent actuating, sensing, and transducing properties. This imposes a challenge for designing and fabricating capable and efficient piezoelectrics for energy harvesters. Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT)-based materials are well known for their high piezoelectric charge coefficient and superior electromechanical coupling performance; hence, they are competitive candidates for energy harvesting. However, in practice, the large energy harvesting figure of merit (FOM) obtained from PMN-PT-based materials is not necessarily replicable. This information is lacking in the literature. This study investigates a large quantity of PMN-PT ceramics by intentionally creating both A and B-site cation off-stoichiometry in order to show the influence of minor changes in the phases on energy harvesting properties. An electron probe microanalyzer is used to accurately quantify the compositions of the formed perovskite phases. The study finds that the Mg content in the resulting perovskite phases is consistently deficient by ∼15% compared to the commonly proposed theoretical stoichiometry. It is also found that the Mg-deficient compound promotes the formation of a specific monoclinic phase (Pm), which is beneficial for improving the FOM by up to 170%. The optimum FOM achieved in this study is 1.9 times as high as the values reported in the literature. On the other hand, the formation of another monoclinic phase (Cm) or the coexistence of a secondary tetragonal phase degrades the properties despite being at the morphotropic phase boundary. The compositional window for forming the favorable Pm phase proves to be narrow.