15 December 2019 in Structural Mechanics of Engineering Constructions and Buildings
ГЛГбагуиди Айссе Жерар Леопольд
Гбагуиди Айссе Жерар Леопольд
Aims of research. The use, design and analysis of architectural and building structures in the form of smooth and composite surfaces have become relevant and in demand lately, which determined the purpose of this article - to analyze the use of analytical surfaces given vector, parametric or explicit equations in real structures. Methods. The relationship between studies on the geometry of surfaces of revolution and transport and the creation of new forms of thin-walled structures and buildings is determined. An example of a real structure is given on each surface. The article does not consider composite, multifaceted, fractal surfaces, as well as surfaces that are not defined analytically. Results. It turned out that only a small number of considered surfaces of these two classes have found application in the world. At the end of the article, a bibliography is presented, which sets out the mathematical side of the design of analytical surfaces, their computer modeling, more detailed information about real structures in the form of the surfaces under consideration.
1 January 2017 in Structural Mechanics of Engineering Constructions and Buildings
LBLaboratoire D’energétique Et de Mécanique Appliquées (Lema) – Epac – Bénin
Laboratoire D’energétique Et de Mécanique Appliquées (Lema) – Epac – Bénin
IBI2M-Gce Université de Bordeaux
I2M-Gce Université de Bordeaux
BORASSUS AETHIOPUM MART OF BENIN USED AS REINFORCEMENT IN CONCRETE: ADHESION CARACTERISATION
1 January 2018 in Structural Mechanics of Engineering Constructions and Buildings
Вопрос стабилизации давления и расхода жидкости особенно актуален в системах коротких трубопроводов, где предъявляются повышенные требования к равномерности подачи рабочей жидкости. В условиях средних и высоких давлений (до 100 атмосфер и выше) стабилизатор давления с эллиптическими упругими камерами создает условия для нормальной работы соответствующего оборудования. Для грамотного проектирования стабилизатора, особенно при решении вопроса об объеме жидкости, который способен вместить стабилизатор, необходимо проводить расчет эллиптической оболочки по деформированному состоянию. В статье приводится расчет эллиптической оболочки по деформированному состоянию методом пошагового нагружения и проверки условий прочности на каждом шаге нагружения. Одним из основных вопросов исследования является вопрос о том, какую максимальную нагрузку могут выдерживать эллиптические камеры. В работе исследуется зависимость максимального давления при котором конструкция работает в упругой области деформирования от толщины стенки эллиптической трубы. Если в ходе гидравлических расчетов становится известен расход жидкости, который необходимо погасить, то необходимо знать, какой объем жидкости способна «принять» камера. В работе приведена зависимость коэффициента увеличения площади поперечного сечения от толщины стенки трубы. Рассмотрены некоторые вопросы проектирования стабилизатора давления.
15 May 2024 in Structural Mechanics of Engineering Constructions and Buildings
It is proved and illustrated that by taking the main frame of the surface, consisting of three plane curves placed in three coordinate planes, three different algebraic surfaces with the same rigid frame can be designed. For the first time, one three of new ruled surfaces in a family of five threes of ruled surfaces, formed on the basis of some shapes of hulls of river and see ships, which, in turn, are projected in the form of algebraic surfaces with a main frame of three superellipses or of three other plane curves, is under consideration in detail with a standpoint of differential geometry. The geometrical properties of the ruled surfaces taken as the middle surfaces of thin shells for industrial and civil engineering are presented. Analytical formulas for determination of force resultants with using the approximate momentless theory of shells of zero Gaussian curvature given by non-orthogonal conjugate curvilinear coordinates are offered for the first time. The results derived using these formulae will help to correct the results obtained by numerical methods.
4 November 2024 in Wood Material Science & Engineering