Fiber-optic multi-band transmission (MBT) aims at exploiting the low-loss spectral windows of single-mode fibers (SMFs) for data transport, expanding by ~11 times the available bandwidth of C-band line systems and by ~5 times C+L-band line systems'. MBT offers a high potential for cost-efficient throughput upgrades of optical networks, even in absence of available dark-fibers, as it utilizes more efficiently the existing infrastructures. This represents the main advantage compared to approaches such as multi-mode/-core fibers or spatial division multiplexing. Furthermore, the industrial trend is clear: the first commercial C+L-band systems are entering the market and research has moved toward the neighboring S-band. This article discusses the potential and challenges of MBT covering the ITU-T optical bands O -> L. MBT performance is assessed by addressing the generalized SNR (GSNR) including both the linear and nonlinear fiber propagation effects. Nonlinear fiber propagation is taken into account by computing the generated nonlinear interference by using the generalized Gaussian-noise (GGN) model, which includes the interaction of nonlinear fiber propagation with stimulated Raman scattering (SRS), and in general considers wavelength-dependent fiber parameters. For linear effects, we hypothesize typical components' figures and discussion on components' limitations, such as transceivers', amplifiers' and filters' are not part of this work. We focus on assessing the transmission throughput that is realistic to achieve by using feasible multi-band components without specific optimizations and implementation discussion. So, results are meant to address the potential throughput scaling by turning-on excess fiber transmission bands. As transmission fiber, we focus exclusively on the ITU-T G.652.D, since it is the most widely deployed fiber type worldwide and the mostly suitable to multi-band transmission, thanks to its ultra-wide low-loss single-mode high-dispersion spectral region. Similar analyses could be carried out for other single-mode fiber types. We estimate a total single-fiber throughput of 450 Tb/s over a distance of 50 km and 220 Tb/s over regional distances of 600 km: ~10 times and 8 times more than C-band transmission respectively and ~2.5 times more than full C+L.
The transmission performance of coherent dual-polarization multi-band OFDM (DP-MB-OFDM) and QPSK (DP-QPSK) are experimentally compared for 100 Gb/s long-haul transport over legacy infrastructure combining G.652 fiber and 10 Gb/s WDM system. It is shown that DP-MB-OFDM and DP-QPSK have nearly the same performance at 100 Gb/s after transmission over a 10 × 100-km fiber line. Furthermore, the origin of performance degradations and limitations of the DP-MB-OFDM is explored numerically, as well as the impact of transmission distance and sub-band spacing.
16 October 2023 in Journal of Lightwave Technology
We report co-propagation experiments of the quantum channel (at 1310 nm) of a Quantum Key Distribution (QKD) system with Dense Wavelength Division Multiplexing (DWDM) data channels in the 1550 nm range. Two configurations are assessed. The first one is a single span configuration where various lengths of Standard Single Mode Fiber (SSMF) (from 20 to 70 km) are used and the total WDM channels power is varied. The Secure Key Rate (SKR) and the Quantum Bit Error Ratio (QBER) are recorded showing that up to ∼17 dBm total power of 30 or 60 channels at 100 Gb/s can coexist with the quantum channel. A metric to evaluate the co-propagation efficiency is also proposed to better evaluate the ability of a QKD system to provide secure keys in a co-propagation regime. The second experiment is a three spans link with a cascade of three QKD systems and two trusted nodes in a 184 km total link length. We report the transmission of a coherent 400 Gb/s Dual Polarization DP-16QAM (Quadrature Amplitude Modulation) channel that transports a QKD secured 100 GbE data stream, with other fifty-four 100 Gb/s WDM channels. Encryption is demonstrated at the same time as co-propagation.
10 October 2018 in Journal of Lightwave Technology
New customer usages such as high-definition videos, business analytics and cloud services stress more and more optical transport networks. This demand for ever-increasing capacity combined with the hard competition between telcos results in requests for lower costs in WDM transport. As WDM transceivers operating at 100G and beyond represent a large part of transmission system cost, a strong pressure is applied on vendors so that they lower the price of line-side interfaces. For the past 6-7 years, some equipment suppliers have focused their efforts on the development of pluggable optics adapted to 100G and beyond WDM transport. Thanks to photonic integrated circuits, they develop multi-source agreement form factors that are able to generate/detect 100G at a very efficient cost, with notably reduced power consumption and high port density. Two flavors are used for pluggable optics that integrate or not the digital signal processing circuitry into the form factor, i.e. digital coherent optics (DCO) and analog coherent optics (ACO), that are supported by two kinds of form factors, i.e. CFP and CFP2. The corresponding cost decrease involved by pluggable optics is really impressive: over the 2014-2018 period the WDM 100G port price has been divided by a factor of ~6, while the power consumption per 100G port oscillates today between 10 and 30 Watts (depending on vendors). In addition, CFP-DCO and CFP2-DCO are now able to generate 100G and 200G data rates with multiple modulation formats (i.e. QPSK, 8QAM, 16QAM) resulting in a very high level of flexibility for these interfaces making them suitable for a wide range of applications. In this invited paper, we present the work performed since 2015 on both 100G CFP-DCO and 100G/200G CFP2-DCO interfaces used in various contexts: short-reach and data center interconnects, metro/regional, long-haul and ultra long-haul optical communications.
6 September 2022 in Journal of Lightwave Technology
During many years, the WDM domain was dominated by vendors/system suppliers that logically proposed their proprietary solutions and technologies. This proprietary environment offered the space to innovate and allowed an unbelievable progress of optical transport networks that were able to cope with traffic increase for 25 years. Thereby, coherent technology enabled an incredible growth of data rate carried by wavelengths from 10G in the middle of 2000’s decade up to 400G today and soon 800G. However, for data center interconnect (DCI) and metro/regional applications, the lack of openness and interoperability of WDM systems appeared as a real weakness for service providers for both the control (i.e., management) and data (i.e., transceiver) plane. While in the Ethernet area (managed by IEEE) interworking and openness is a reality since a long time, it was not still the case in the WDM domain few years ago. Fortunately, Multi-Source Agreement (MSA) organizations like the Optical Internetworking Forum (OIF), OpenROADM, OpenZR+ and others but also standardization bodies like ITU-T started to break the vendors’ lock-in and fostered the emergence of interoperable WDM transceivers at 100G, 200G, 400G and soon at 800G. In parallel, the great progress of microelectronics and photonic integration also paved the way of a miniaturization of WDM interfaces allowing to have ever more powerful digital signal processing (DSP) engines at higher data rates with drastic power consumption reduction authorizing new fundamental applications like IP over WDM. In this paper, we present for the first time an end-to-end interoperable 400-GbEthernet (GbE) optical transmission on 927-km that integrates the most advanced 400G interoperable pluggable optics covering the needs of Ethernet client (IEEE 802.3 400GBASE), data-center interconnect (OIF 400-ZR), and metro/regional (400G-OpenROADM) networks. The generated 400-GbE data flows seamlessly cross three interoperable sections, i.e., 2-km 400GBASE-FR4, 8 × 100-km 400G-OpenROADM and 125-km 400-ZR standard single-mode fiber lines. The 400G optics used here come from various vendors and embed interoperable DSP chips provided by various suppliers, ensuring the full interoperability of the experimental set-up presented here. The sensitivity to a reconfigurable optical add-drop multiplexer (ROADM) cascade insertion in the OpenROADM section is also investigated.
Advance in optical transmission towards higher bit rate and denser spectral efficiency is challenged by nonlinear effects. The existing digital signal processing techniques to compensate nonlinear fiber transmission impairments suffer from heavy computations and require the knowledge of a large number of system parameters, which is impractical in field environment. Neural networks are among the investigated solutions in literature to cope with the complexity of those models. Taking advantage of the huge amount of data available in optical transport networks, WDM systems represent a fertile field to apply neural networks.This paper is a non-exhaustive survey on neural network applications for nonlinear impairments mitigation in optical fiber transmission systems. We distinguish two approaches. The first one is dependent of the NonLinear Schrödinger Equation (NLSE) while the second one is based on machine learning techniques. These two approaches achieve similar performance compared to the well-known nonlinear mitigation methods with reduced computational complexity.