1 June 2012 in International Journal of Machine Tools and Manufacture
1 August 2018 in Additive Manufacturing
1 February 2016 in International Journal of Machine Tools and Manufacture
1 February 2013 in International Journal of Computer Integrated Manufacturing
Today, hybrid manufacturing technology has drawn significant interests from both academia and industry due to the capability to make products in a more efficient and productive way. Although there is no specific consensus on the definition of the term ‘hybrid processes’, researchers have explored a number of approaches to combine different manufacturing processes with the similar objectives of improving surface integrity, increasing material removal rate, reducing tool wear, reducing production time and extending application areas. Thus, hybrid processes open up new opportunities and applications for manufacturing various components which are not able to be produced economically by processes on their own. This review paper starts with the classification of current manufacturing processes based on processes being defined as additive, subtractive, transformative, joining and dividing. Definitions of hybrid processes from other researchers in the literature are then introduced. The major part of this paper reviews existing hybrid processes reported over the past two decades. Finally, this paper attempts to propose possible definitions of hybrid processes along with the authors’ classification, followed by discussion of their developments, limitations and future research needs.
1 January 2016 in Journal of Manufacturing Processes
This paper presents the first comprehensive investigations on the effects of cryogenic cooling using liquid nitrogen on surface integrity of Ti-6Al-4V titanium alloy workpiece in end milling operations. Titanium is classified as a notoriously difficult-to-machine material, where its machining is characterised by poor surface integrity and short tool life. Increasing productivity, whilst meeting surface integrity requirements for aerospace and medical titanium-based components has always been a challenge in machining operations. Cryogenic machining using super cold liquid nitrogen at -197°C is a method to facilitate heat dissipation from the cutting zone and reduce the chemical affinity of workpiece and cutting tool materials and therefore improving machinability. Since milling is one of the major machining operations for aerospace components, this study is concentrated on cryogenic milling. The effects of cryogenic cooling on surface integrity are compared to conventional dry and flood cooling in end milling Ti-6Al-4V titanium alloy. A series of machining experiments were conducted at various combinations of cutting parameters. Surface roughness and microscopic surface integrity were investigated and subsurface microhardness was measured for each sample. The analysis indicated that cryogenic cooling has resulted in up to 39% and 31% lower surface roughness when compared to dry and flood cooling methods respectively. Furthermore, microscopic surface defects were significantly reduced as a result of cryogenic. The investigations indicated that cryogenic cooling considerably improves surface integrity in end milling of Ti-6Al-4V
1 January 2012 in CIRP Journal of Manufacturing Science and Technology
Machining is one of the major activities in manufacturing industries and is responsible for a significant portion of the total consumed energy in this sector. Performing machining processes with better energy efficiency will, therefore, significantly reduce the total industrial consumption of energy. In this paper, a framework is presented to validate the introduction of energy consumption in the objectives of process planning for CNC machining. The state of the art in process planning and energy consumption in manufacturing research is utilised as a basis for the framework. A mathematical representation of the logic used is presented followed by two sets of experiments on energy consumption in machining to validate the logic. It is shown that energy consumption can be added to multi-criteria process planning systems as a valid objective and the discussion on using resource models for energy consumption estimation concludes the paper. These experiments represent a part test procedure machining proposal for the new environmental machine standard ISO 14955 Part 3