1 August 2018 in Chemical Communications
A new approach for obtaining high-performance anion exchange membranes by using a thermally convertible precursor has been developed.
1 September 2014 in Journal of Engineering and Technological Sciences
Cassava starch was used as the main chain in the copolymerization of a superabsorbent polymer composite (SAPC) based on acrylic acid and bentonite. The SAPC was synthesized through graft polymerization using nano-sized bentonite as reinforcement. The variables in this experiment were: bentonite concentration, acrylic acid to starch weight ratio, concentration of initiator, and cross linker. The product was characterized using FTIR, SEM and TGA-DSC. The results show that the polymerization reactions involved processes of incorporating starch chains as polymer backbone and grafting acrylic acid monomers onto it. The use of cassava starch in the polymerisation produced a very short reaction time (10-15 minutes), which led to SAPC production with higher efficiency and lower cost. Bentonite interacts with monomers via hydrogen and weak bonding, thus improving the thermal properties of the product. The maximum absorbance capacity obtained was at an acrylic acid to starch weight ratio of 5 and a concentration of initiator, cross linker and bentonite of 0.5, 0.05 and 2 weight percent, respectively. The product is suitable for agricultural and medical applications as well as common superabsorbent polymer applications
26 August 2015 in Advanced Materials Research
Bacterial cellulose (BC) is a natural polymer which can be produced from various substrates easily found in Indonesia. Bacterial cellulose is believed to be a promising and cost effective bone scaffold in which a bone regeneration rate enhanced so the healing process is faster. In this experiment, Bacterial Cellulose (BC)/ Polyvin y l Alcohol (PVA) nanocomposite was made to give a further improvement in the properties. This nanocomposite was made thorough BC biosynthesis in Gluconacetobacter xylinus fermentation medium that was modified by addition of PVA. The PVA concentrations were varied as 0, 3, 6, 9, and 12 % w of fermentation medium. The culture had been agitated by magnetic stirrer for 28 days before freeze drying method was conducted to obtain dry BC/PVA nanocomposite. The product of BC/PVA nanocomposite was then studied for thermal characteristics using Differential Scanning Calorimetry (DSC) and Thermogravimetry Analysis (TGA). Pure BC has melting temperature (Tm) at 350 . 3 o C and pure PVA at 181 . 3 o C. Experimental results showed that the higher PVA content in fermentation medium decreased the melting temperature of BC/PVA nanocomposite produced.
1 June 2014 in Advanced Materials Research
This research describes morphological aspect of BC-PVA nanocomposite asscaffold for bone tissue that was synthesized by adding PVA to Gluconacetobacterxylinus fermentation medium. PVA concentrationswere varied as 0,3,6,9, and 12 % (w/v) of the medium. The culture was agitated with magnetic stirrer for 28 days. Freeze drying was then conducted to obtain dry BC/PVA nanocomposite. Some nanocomposite samples subjected to sonication treatments. The morphology of BC-PVA nanocomposite was examined by Scanning Electron Microscope (SEM) whileits surface area and pore characteristic were determined by nitrogen adsorption of BJH method (BET device). SEM images showed the smallest fiber diameter of approximately 35 nm andnanocomposite surface that was smoother with higher PVA content in the fermentation medium. The sonicationtreatmentcould enhance nanocomposite surface area from 17,2 m2/g to 72,7 m2/g for pure BC sample and from 9,9 m2/g to 14,3 m2/g for 12% PVA sample. BC/PVA nanocompisite had smaller pore diameter than pure BC and its size increased with more PVA content in the fermentation medium.PVA could modify BC morphology bymakinga hindrance on cellulose nanofiber sothat fiber agglomeration could be avoided andthe sonicationtreatmentshowedto enhance this phenomena.
29 February 2016 in Journal of Engineering and Technological Sciences
Synthesis of Acrolein from Glycerol Using FePO4 Catalyst in Liquid Phase Dehydration
1 July 2017 in IOP Conference Series: Materials Science and Engineering