27 June 2017 in Reports on Geodesy and Geoinformatics
Urban is one of the three bells in the belfry of St. Trinity Church in Krosno. It is the largest one, with diameter equal to 1,535 mm and it is commonly considered as one of the largest historical bells in Poland. The total mass of all the three bells is close to 4,200 kilograms, so the dynamic actions produced by swinging have a great effect on the supporting structure and on the tower. However, the exact weight of the biggest bell isn't known, and for safety reasons it should be estimated in order to verify the real dynamic forces affecting the structure. The paper describes the method of Urban bell’s survey using terrestrial laser scanning and a total station as a task to estimate its weight by determining its volume.
31 May 2016 in Reports on Geodesy and Geoinformatics
Important qualitative changes were taking place in polish geodesy in last few years. It was related to application of new techniques and technologies and to introduction of European reference frames in Poland. New reference stations network ASG-EUPOS, together with Internet services which helps in precise positioning was created. It allows to fast setting up precise hybrid networks. New, accurate satellite networks became the basis of new definitions in the field of reference systems. Simultaneously arise the need of new software, which enables to execute the geodetic works in new technical conditions. Authors had an opportunity to participate in mentioned undertakings, also under the aegis of GUGiK, by creation of methods, algorithms and necessary software tools. In this way the automatic postprocessing module (APPS) in POZGEO service, a part of ASG-EUPOS system came into being. It is an entirely polish product which works in Trimble environment. Universal software for transformation between PLETRF89, PL-ETRF2000, PULKOWO’42 reference systems as well as defined coordinate systems was created (TRANSPOL v. 2.06) and published as open product. An essential functional element of the program is the quasi-geoid model PL-geoid-2011, which has been elaborated by adjustment (calibration) of the global quasi-geoid model EGM2008 to 570 geodetic points (satellite-leveling points). Those and other studies are briefly described in this paper.
1 May 2020 in Journal of Surveying Engineering
Geometrical surveys are an important part of the renovation process in the oil and gas and shipbuilding industries. They enable improved safety and decreased costs of such types of processes. The crucial moment of such surveys is the determination of the position, deflections and dimensions of steel flanges in a local three-dimensional (3D) coordinate system. Companies that do such work declare submillimeter accuracy; however, no reliable publications have been found that could confirm this. This paper presents the main concept of such kinds of surveys and describes the two methods: standard and noncontact. The tests that were carried out allowed determination of the real measurement accuracy of flanges of different sizes for both methods. root mean square error (RMSE) was calculated for every parameter. The results show that for most of the flange parameters, the accuracy was better than 1 mm. The results indicate that the size of the flange and amount of measured points do not have a significant influence on the final accuracy; however, the distribution of the points is important.
28 March 2017 in Civil and Environmental Engineering Reports
The main purpose of this study was to obtain information about the actual precision of angle measurements with two instruments (Trimble M3 1 "and South NTS-362R), realizable in given measurement conditions. This object is achieved by using a simplified method of testing instruments contained in the PN-ISO 17123-3 standard [1]. This is a continuation of research described in [2], carried out on the same test base, but this time in a different, less favorable field conditions. The use of the same instrument has created an opportunity to compare and analyze the measurement results. The scope of work includes the measurement and results preparation along with statistical processing of the obtained results for both instruments.