A novel potentiometric sensor for carbon dioxide (CO2) detection utilizing a composite membrane of Polymer of Intrinsic Microporosity (PIM‐1) and 18‐diazabicyclo[5.4.0]undec‐7‐ene imidazolate (DBU‐imidazolate) is presented. The high surface area and gas permeability of PIM‐1, combined with the chemical affinity and ion‐exchange properties of DBU‐imidazolate, contribute to enhanced CO2 sensitivity and selectivity. The research objectives included the synthesis of PIM‐1 and DBU‐imidazolate, the preparation of composite membranes, and the evaluation of their performance as CO2 sensors. Solvent casting and impregnation methods are employed to prepare the membranes, which are characterized using Thermal Gravimetric Analysis (TGA), and Field Emission Scanning Electron Microscopy (FESEM). CO₂ absorption tests and Electrochemical Impedance Spectroscopy (EIS) are conducted to assess the sensors' performance. The PIM‐1/DBU‐imidazolate membrane exhibited high efficiency in CO₂ capture and release. Open circuit voltage (OCV) measurements are performed under varying concentrations of CO2 exposure and cycles of adsorption/desorption. Results show that the membrane achieves steady state faster at higher CO2 concentrations, with a logarithmic relationship between CO2 concentration and voltage variation, indicating potential for CO2 detection in human environments. These results confirm the sensor's ability to detect varying CO2 concentrations, highlighting its potential for reliable and efficient CO2 monitoring in environmental and industrial applications.
This work investigated the possibility of using functionalized graphene oxide and sulfonated poly(ether ether ketone) coatings on activated carbons to obtain an asymmetric device suitable for Capacitive Mixing (CapMix) application. Herein the synthesis and fabrication procedures of both materials and electrodes are reported, together with a comprehensive list of electrochemical characterization techniques. The results from the electrochemical characterization are used to design the optimal operational parameters for CapMix experiments involving the materials being studied. A homemade cell is designed and fabricated for CapMix application by polymer micromachining. Electrochemical tests are conducted to optimize the process parameters and the results of this optimization are reported, proving that both the materials and the process parameters play a key role in CapMix. The final device can generate a net power output of 12 mW m−2 by mixing simulated seawater and freshwater. This result paved the way for further application of graphene oxide in the field of renewable energy.
Laser‐induced graphene (LIG) has emerged as a highly promising material for energy storage devices due to its excellent electrical conductivity, high specific surface area, and compatibility with flexible substrates. Despite these advantages, one of the main challenges in implementing LIG‐based electrodes is achieving a stable and efficient electrical connection with metallic current collectors without compromising the intrinsic properties of the material. In this study, we investigate a combination of physical approaches to establish a reliable and robust electrical bond between LIG and metal current collectors while avoiding chemical treatments, conductive adhesives, or binders. Electrode fabrication is performed using physical vapor deposition (PVD) and laser processing techniques, which provide precise control over both metallic layer deposition and LIG formation. These methods enable straightforward customization of electrode architectures for applications, including symmetric and hybrid energy storage devices. Furthermore, fast and selective laser treatments are adopted to enhance the mechanical integrity and long‐term stability of the electrode interfaces. Our results demonstrate a contact resistance as low as 1.3 Ω at the LIG‐gold interface without the use of binders or additional conductive agents. The proposed fabrication strategy improves electrical performance while simplifying the overall manufacturing process. By minimizing complex chemical procedures, it enables scalability.
This work explores an innovative approach to convert CO 2 into a valuable energy resource using ionic liquid (IL)–based electrochemical systems. The employed ionic liquid, [DBUH][Im], combines the strong CO 2 affinity of imidazole with the high basicity of DBU, promoting selective carbamate formation while suppressing parasitic reactions. CO 2 chemisorption induces ion rearrangement at the electrode–electrolyte interface, generating a measurable open‐circuit voltage shift. However, the high viscosity of the pristine IL significantly restricts ionic mobility, especially after CO 2 absorption. Dilution with propylene carbonate improves conductivity and enhances electrochemical performance. A multiparametric study was conducted under realistic working conditions, evaluating gas flow rate influence, CO 2 /N 2 selectivity, operating temperature, and long‐term stability. Moreover, the introduction of a supporting‐salt further improved ionic conductivity, interfacial properties, and pore accessibility, leading to higher capacitance and harvested power. Overall, these results highlight the potential of tailored IL‐based electrolytes for integrated CO 2 capture and energy conversion technologies.