1 January 2014 in Energy Procedia
Charcoal is a relative cheap source of energy for stoves and cauldrons, having the advantage of being neutral with respect to CO2 emissions. The conventional process to produce charcoal is through methods such as earth pits or brick kilns, in which the energy required to produce the carbonization is obtained from the combustion of a part of the wood, which leads to a considerable decrease in the net production of carbon, combined with lack of control of the temperature of the process, leading to products of lower quality and a maximum yield of 200-300kg per ton of wood used.In this paper we present the design of a solar oven capable of producing charcoal out of wood, together with its construction and evaluation. The design does not require solar tracking throughout the all-day.The prototype built has a collection surface of 1.37 m2, and can obtains 70g of charcoal out of 180g of wood, in approximately five hours, in a sunny day and with a typical irradiance of 800W/m2, which corresponds at an efficiency of 380kg per tonne
30 December 2025 in Journal Industrial Organization
HEHugo Escalera-Rodríguez
JGJosé Antonio González-Hernández
José Antonio González-Hernández
This work presents a combined approach using factorial design of experiments and machine learning models to analyze and predict the mass of parts manufactured by injection molding. A 2k factorial design was employed to evaluate the effect of four process factors—holding pressure, injection pressure, injection time, and injection speed—on the mass of molded parts. A factorial regression model was constructed and assessed using analysis of variance, showing a high coefficient of determination. Subsequently, a regression model based on random forests was trained, achieving remarkable predictive performance. Both approaches were compared using mean squared error and root mean squared error metrics. The results show that both models are highly accurate. This hybrid approach provides a solid foundation for optimizing the injection molding process in industrial applications.