An approach for predicting the reflected sound pressure is proposed in one-dimensional sound field. For a duct ended with a rigid reflective surface, only one microphone is required to measure the total sound pressure on the surface, which is further used as the error sensing strategy in an active noise control(ANC) system to reduce the in-duct reflection. Experiments are carried out to validate the prediction method, and a broadband feedforward ANC system is implemented to suppress the impulsive reflection. It is found that the ANC system based on the reflected sound prediction is effective, and 12.2 dB attenuation of the one-dimension impulsive reflection is obtained after the active control.
The degradation characteristics of silicon-germanium heterojunction bipolar transistors (SiGe HBTs) under different bias modes (forward, cutoff and saturation) during irradiation were reported after multiple pulsed neutron-gamma irradiation at room temperature. The radiation-sensitive parameters of the test samples, including base current I B , collector current I C and DC current gain $\beta $ , were measured and compared before and after every reactor n- $\gamma $ pulse irradiation. The test results show that I B increased with increasing fluence, and I C slightly increased in the low base-emitter voltage V BE region (approximately from 0.4 V to 0.5 V) and decreased in the high-V BE region (approximately V BE >0.5 V). Moreover, the degradation degree of the test samples was different under different bias conditions. The performance of the test samples under cutoff bias mode displayed the most serious degradation, while those under forward bias mode suffered minimum damage. Meanwhile, the time-dependent annealing characteristics of the DC current gain for SiGe HBTs at various bias conditions were compared and analyzed.