Scissor-type systems are frequently used as lifting systems in the industry. These systems are mainly preferred to do maintenance, repair, and clean. In this study, the design and analysis of a scissor lift system were performed with having a load carrying capacity of 500kg and a working height of 2m. The solid model and assembly of the system have been developed by the SolidWorks program. The structural analysis of the system was also investigated with the help of the same program i.e. stress, deflection, and safety factor values of system elements were obtained. As a result of the analyses, it was concluded that the system designed could safely be used during load/unload operations.
Makina Elemanları-Cilt 2 adlı kitap, Prof. Dr. Erdem Koç tarafından Ondokuz Mayıs Üniversitesi Makina Mühendisliği Bölümü için hazırlanmış bir ders kitabıdır. Beşinci baskısı yapılan kitap, öğrenciler ve meslektaşlar tarafından kaynak olarak kullanılmaktadır. Yazar, öğrencilerin ve meslektaşların her türlü tenkit, öneri ve katkılarına açık olduğunu belirtmektedir. Kitabın öğretici ve yol gösterici niteliğiyle beklenen hizmeti vereceği umulmaktadır. The book titled \"Elements of Machinery - Volume 2\" is a textbook prepared by Prof. Dr. Erdem Koç for the Department of Mechanical Engineering at Ondokuz Mayıs University. The book, which has reached its fifth edition, is used as a reference by students and colleagues. The author emphasizes that he is open to all kinds of criticism, suggestions, and contributions from students and colleagues. It is hoped that the book will provide the expected service with its instructive and guiding nature.
Makina Elemanları adlı kitap, Prof. Dr. Erdem Koç tarafından yazılmış ve Ondokuz Mayıs Üniversitesi Makina Mühendisliği Bölümü tarafından yayınlanmıştır. Kitap, makinaların oluşumunda kullanılan elemanların hesaplama ve şekillendirme prensiplerini inceler. Yedinci baskısı yapılan kitap, önceki baskıların tükenmesi ve öğrenciler ve meslektaşlar tarafından kaynak olarak kullanılması üzerine hazırlanmıştır. Bu baskıda, yazım ve baskı hataları düzeltilmiş, içerikte ise ekler ve kaynaklar gözden geçirilerek düzenlemeler yapılmıştır. Ayrıca, önceki baskılarda eksikliği duyulan bir dizin de kitaba eklenmiştir. Kitabın basımında emeği geçen Akademisyen Yayınevi A.Ş. yetkililerine ve kitabın hazırlanmasında yardımcı olan Doç. Dr. Belkıs Zervent Ünal ve Arş. Gör. Mahmut Can Şenel'e teşekkür edilmektedir. Kitabın yazarı, öğrenciler ve meslektaşlarının her türlü eleştiri, öneri ve katkılarına açık olduğunu belirtmektedir. Kitabın amacı, makina elemanlarının hesaplama ve şekillendirme prensiplerini öğretmek ve yol göstermek olduğunu vurgulamaktadır. The book titled \"Machine Elements\" is written by Prof. Dr. Erdem Koç and published by the Department of Mechanical Engineering at Ondokuz Mayıs University. The book examines the calculation and shaping principles of the elements used in the formation of machines. The seventh edition of the book has been prepared due to the depletion of previous editions and its use as a resource by students and colleagues. In this edition, writing and printing errors have been corrected, and the content has been reviewed and revised with additions and references. Additionally, an index, which was lacking in previous editions, has been added to the book. The author expresses gratitude to the officials of Akademisyen Yayınevi A.Ş. for their contributions to the printing of the book, as well as to Assoc. Prof. Dr. Belkıs Zervent Ünal and Research Assistant Mahmut Can Şenel for their assistance in its preparation. The author states that they are open to all kinds of criticism, suggestions, and contributions from students and colleagues. The aim of the book is emphasized to be teaching and guiding the calculation and shaping principles of machine elements.
Makina Elemanları-Çözümlü Problemler adlı kitap, Prof. Dr. Erdem Koç tarafından yazılmıştır. Kitap, makina mühendisliği öğrencileri ve meslektaşları tarafından kaynak olarak kullanılmak üzere hazırlanmıştır. Altıncı baskısı yapılan kitap, önceki baskıların tükenmesi ve talep görmesi üzerine yayınlanmıştır. Kitapta, makina elemanları konularıyla ilgili çözümlü problemler bulunmaktadır. Kitabın içeriği, önceden belirlenen yazım ve baskı hatalarının düzeltilmesiyle güncellenmiştir. Yeni baskının gerçekleştirilmesinde Akademisyen Kitabevi A.Ş. yetkilileri ve kitabın hazırlanmasında emeği geçen öğretim elemanlarına teşekkür edilmektedir. Kitabın yazarı, öğrencilerin ve meslektaşların her türlü tenkit, öneri ve katkılarına açık olduğunu belirtmektedir. Kitabın Ekim 2019'da yayınlandığı ve hizmet vermesi beklenildiği ifade edilmektedir. The book titled \"Machine Elements-Solved Problems\" is written by Prof. Dr. Erdem Koç. The book is prepared to be used as a resource by mechanical engineering students and colleagues. The sixth edition of the book has been published due to the previous editions being sold out and in demand. The book contains solved problems related to machine elements topics. The content of the book has been updated by correcting previously determined writing and printing errors. The authorities of Akademisyen Kitabevi A.Ş. and the academic staff involved in the preparation of the book are thanked for their contributions in the realization of the new edition. The author of the book states that they are open to any criticism, suggestions, and contributions from students and colleagues. It is stated that the book was published in October 2019 and is expected to serve its purpose.