Antoine Gallet

Antoine Gallet

Auto-generated profile, based on publicly available information

Antoine Gallet

Université Paris-Saclay, CEA, List , F-91120, Palaiseau

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 February 2026 in Measurement
Verified
Journal Article
Open access
NDNicolas DERRIEN
Nicolas DERRIEN
AGAntoine Gallet
Antoine Gallet
MLMaximilien Lehujeur
Maximilien Lehujeur
ARArnaud Recoquillay
Arnaud Recoquillay
ODOlivier Durand
Olivier Durand
GLGuillaume Laffont
Guillaume Laffont

1 October 2026 in e-Journal of Nondestructive Testing
Verified
Journal Article
Open access
PDF file
AGAntoine Gallet
Antoine Gallet
ARArnaud Recoquillay
Arnaud Recoquillay
NRNicolas Roussel
Nicolas Roussel
JAJulien Albertini
Julien Albertini
TDThéo Duval
Théo Duval
GLGuillaume Laffont
Guillaume Laffont
Acoustic emission is a key phenomenon in Structural Health Monitoring (SHM) as it enables to track small evolutions of a system. Most usually, piezoelectric actuators are used as the sensing element, hence the temperature of the monitored structure is fairly restricted. A major challenge in the field of SHM is to alleviate this restriction. Optical fibers are good candidates for that purpose as they can measure strain at high frequencies while withstanding harsh environments such as extreme temperatures. In this contribution, we demonstrate for the first time acoustic emission measurement at temperatures above 1000 ◦C. To achieve this, we interrogate femtosecond point-by-point Fiber Bragg Grating (FBG) sensors, inscribed in a commercially available fiber, with the edge filtering technique.

1 August 2026 in e-Journal of Nondestructive Testing
Verified
Journal Article
Closed access
PDF file
UEUniversité Gustave Eiffel
Université Gustave Eiffel
NDNicolas Derrien
Nicolas Derrien
MLMaximilien Lehujeur
Maximilien Lehujeur
ODOlivier Durand
Olivier Durand
AGAntoine Gallet
Antoine Gallet
OAOdile Abraham
Odile Abraham
The ability to monitor variations in seismic or acoustic wave velocity is of major interest in many applications like Structural Health Monitoring (SHM), near surface geophysics, the security in an underground context or oil industry. The use of buried sensors is particularly suited to this goal, as it provides information about the internal properties of the probed medium. Fiber Optic Sensors (FOS) offer some advantages in buried contexts, such as their low intrusiveness (due to their small diameter) and their immunity to electromagnetic interferences. In particular, Fiber Bragg Gratings (FBGs) sensors can be used to measure dynamic strain fields caused by mechanical waves. The primary information that can be gathered from these measurements is the travel time of a P-wave between a source and a buried receiver. Here we attempt to measure P-wave travel time variations in order to image a local change in the mechanical properties of the probed medium. A differential inversion approach is used to convert travel time differences into an image of the relative velocity variations. To validate this method, a combination of numerical studies and laboratory experiments is used. To this end, a polyurethane resin mock-up is made, in which FBGs sensors are embedded and used as ultrasonic sensors. Then, the local changes in P-wave velocity between a reference state and two disturbed states of the mock-up is map, based on the inversion of P-wave travel time differences. The results of differential inversions demonstrate that the imaging method developed can be used to monitor a local P-wave velocity contrast using embedded FBGs as ultrasonic sensors.

1 August 2026 in e-Journal of Nondestructive Testing
Verified
Journal Article
Open access
PDF file
TDThéo Duval
Théo Duval
JAJulien Albertini
Julien Albertini
AGAntoine Gallet
Antoine Gallet
NRNicolas Roussel
Nicolas Roussel
CFClément Fisher
Clément Fisher
GLGuillaume Laffont
Guillaume Laffont
One of the current challenges in Structural Health Monitoring (SHM) is the validation of new processing algorithms and the development of new methods. To achieve this, it is relevant to have complete control over the entire chain, from instrumentation to processing algorithms. To address this challenge, CEA List has developed an opto-electronic acquisition system using Fiber Bragg Gratings (FBGs) to measure ultrasonic waves. This system called “Optogero” has seven optical channels to enable simultaneous interrogation of multiple gratings. (cf. Figure 1). In several SHM applications, FBGs offer numerous advantages over the more commonly used piezoelectric transducers (PZT). For instance, they can operate at much higher temperatures (above 1,000°C) than conventional PZT (around 200°C). Optical fibers can also be integrated directly into a structure with very limited intrusiveness. However, the interrogation of FBGs presents several technical challenges, and their sensitivity currently remains lower than that of PZTs. The Optogero optoelectronic interrogation system is based on the edge-filtering measurement method. It can scan up to 7 Bragg gratings in parallel to identify their optimal operating point in order to maximize their sensitivity to ultrasonic waves. Real-time control of the laser source wavelength eliminates the consequences of varying environmental conditions, such as quasi-static strain and temperature changes in the structure. These effects would otherwise alter the response of the FBG and drive it away from the optimal operating point of the system. Various analog and digital processing techniques are integrated into the system to improve the signal to noise ratio. The Optogero system also includes a middleware architecture that allows users to easily embed data processing algorithms (imaging, artificial intelligence) for specific applications. The system has been tested over a two-year period in the laboratory to validate its operation. Measurements were done on various materials such as aluminum, polymer-based composites or concrete, using several different testing methods (acoustic emission measurements, guided wave imaging, at room temperature and high temperatures). We will present the operating principles of Optogero and the system's performance in a few representative use cases.

1 August 2026 in e-Journal of Nondestructive Testing
Verified
Journal Article
Open access
PDF file
AGAntoine Gallet
Antoine Gallet
ARArnaud Recoquillay
Arnaud Recoquillay
NRNicolas Roussel
Nicolas Roussel
JAJulien Albertini
Julien Albertini
TDThéo Duval
Théo Duval
GLGuillaume Laffont
Guillaume Laffont
Measurement of guided waves at high temperatures is a major challenge in SHM for several critical applications in aerospace, nuclear and other industries. Classic piezoelectric sensors are based on lead zirconium titanate which have a Curie temperature around 350 °C preventing the use of these transducers at higher temperatures. Optical fiber sensors, based on fused silica, are intrinsically more stable at high temperatures. Particularly, regenerated and femtosecond microvoid-based Fiber Bragg Gratings (FBGs) were demonstrated to operate at temperatures exceeding 1000 °C. Ultrasonic wave measurement with FBGs can be realised using the edge filtering method, consisting of placing a narrow-band light source on the edge of the reflection peak of the grating. Strain applied to the FBG will modify the grating reflection spectrum and hence change the reflected power at the source wavelength. This power is measured and constitutes the ultrasonic signal. Among the advantages of this method, it provides a high-enough sensitivity to measure sub-micron strain and it enables high sampling rates, both being required to measure guided-waves. As FBGs are also sensitive to quasi-static strain and temperature changes, it is advantageous to use a tunable laser with a tracking algorithm to lock the laser on the edge of the grating. A home-made interrogation based on the aforementioned principles was developed. To this day, high temperature measurements of ultrasonic waves remains challenging. Particularly, the sensor’s lifespan will depend on the amplitude loss and wavelength drift of the grating, but also on its attachment especially on structures with high thermal dilatation. Hence, coupling strategies for the fiber will be discussed: indeed careful choice of the adhesive should be made. Removing the coating of the fiber can also be considered as offthe- shelf coatings have temperature limits below the one of the fiber. In this contribution, we will present measurements of ultrasonics guided waves performed at high temperatures (up to 1000 °C) in a tubular oven (cf. attached figure) with femtosecond microvoid FBGs, using the edge-filtering based interrogation system. Especially, we will illustrate its ability to measure acoustic emission signals in severe conditions hardly achievable by current monitoring solutions.

1 September 2026 in e-Journal of Nondestructive Testing
Verified
Journal Article
Open access
PDF file
TDThéo Duval
Théo Duval
JAJulien Albertini
Julien Albertini
AGAntoine Gallet
Antoine Gallet
NRNicolas Roussel
Nicolas Roussel
CFClément Fisher
Clément Fisher
GLGuillaume Laffont
Guillaume Laffont
L’un des défis actuels en Structural Health Monitoring (SHM) réside dans la validation de nouveaux algorithmes de traitement et le développement de nouvelles méthodes. Pour y parvenir, il est essentiel de disposer d’un contrôle complet sur l’ensemble de la chaîne, depuis l’instrumentation jusqu’aux algorithmes de traitement. Pour relever ce défi, le CEA List a développé un système d’acquisition opto-électronique utilisant des réseaux de Bragg (FBG) pour la mesure d’ondes ultrasonores. Ce système, nommé « Optogero », dispose de sept voies optiques permettant l’interrogation simultanée de multiples réseaux. Le système Optogero repose sur la méthode de filtrage sur flanc à l’aide de lasers accordables. Pour chaque voie, une procédure de balayage identifie le point de fonctionnement optimal au demi-maximum du pic de réflexion du réseau, permettant ainsi la détection d’ondes ultrasonores par filtrage sur flanc. Un asservissement en temps réel de la longueur d’onde du laser compense les dérives thermiques et les déformations quasi-statiques, garantissant une stabilité même dans des environnements sévères. Optogero intègre diverses techniques de traitement analogique et numérique pour optimiser le rapport signal sur bruit et obtenir une détection plus fiable. Son architecture middleware ouverte facilite l’intégration transparente d’algorithmes de traitement, tels que l’imagerie structurale ou l’intelligence artificielle. Validé lors de plusieurs campagnes d’essais, Optogero a démontré son efficacité sur divers matériaux (aluminium, composites, béton) en utilisant à la fois des méthodes actives (imagerie par ondes guidées) et passives (émission acoustique), dans des conditions de températures ambiantes et extrêmes.