26 August 2022 in IEEE Transactions on Wireless Communications
Reconfigurable intelligent surface (RIS), which provides indirect line-of-sight (LoS) transmission paths between the receiver and its blocked transmitter, has been proposed as one of the promising technologies for network performance enhancement. Recent works indicate that both the numbers of RISs and unit cells per RIS have a significant impact on network performance. However, with a given total number of unit cells, the joint analysis of these two factors considering blockage effect has not been investigated. In this paper, the coverage probability of a three-dimensional downlink millimeter wave RIS-assisted network is analyzed. We first derive the acceptable area where a LoS RIS is capable to satisfy the signal-to-noise ratio threshold at the receiver. Next, we model the centers of building blockages and human-body blockages as two independent Poisson point processes and derive the probability that indirect LoS transmissions exist. Then, we derive and validate the analytical upper and lower bounds of the coverage probability as the functions of network parameters and blockage densities. We also derive and validate the closed-form coverage probability when RISs are much closer to UE than BS. Finally, we propose a general network cost model for RIS-assisted network. Results show that in terms of coverage enhancement, densely deployed small-scale RISs outperform sparsely deployed large-scale RISs in scenarios with dense blockages or short transmission distances, while sparsely deployed large-scale RISs are preferable in scenarios with sparse blockages or long transmission distances.
23 August 2021 in IEEE Wireless Communications Letters
Both reconfigurable intelligent surfaces (RISs) and ultra-dense (UD) small-cell (SC) base stations (BSs) are investigated for indoor mmWave wireless coverage enhancement. To explore which deployment strategy is more cost-effective, the costs of deploying both RISs and UD SCs are defined and calculated. Through jointly analyzing coverage probability and network cost in typical indoor environments, we conclude that the same network coverage can be achieved by multiple deployment strategies. To achieve certain level of coverage probability with the lowest network cost, a proper number of BSs are crucial for RIS-assisted networks.
11 August 2022 in IEEE Transactions on Broadcasting
Transmissive reconfigurable intelligent surfaces (RISs) are a promising solution for coverage enhancement of the future outdoor-to-indoor (O2I) millimeter wave (mmWave) network. In this work, the coverage probability of the multiple transmissive RIS-aided O2I mmWave network is investigated. Firstly, the system model of the three-dimensional O2I mmWave network considering random blockages is proposed. Moreover, the spatial correlation of blockages is analyzed to derive the accurate blockage probability. Furthermore, based on the blockage probability, the closed-form approximation of the signal-to-noise ratio (SNR) coverage probability is derived and verified. Finally, the impact of blockage density, the number and locations of RISs on the coverage probability is analyzed. According to the numerical results, the highest coverage enhancement caused by four small-scale RISs with appropriate locations reaches $69.5$ % higher compared with a large-scale RIS located at the center of the building envelope.
18 August 2021 in IEEE Transactions on Vehicular Technology
In this work, we leverage the clustered $\beta$ -Ginibre point process (GPP) and the queueing theory to analyse the delay performance in a large-scale repulsive fog radio access network (F-RAN) with computation offloading, which plays a key role on the delay performance. In particular, the average delay defined as the mean value of delay for executing the computing tasks and the task completion probability (TCP) defined as the probability of the delay for executing the computing task being smaller than a target delay, are derived in analytical forms and validated by Monte Carlo simulations. Based on these results, the optimal rate threshold, which affects the task offloading probability and the transmission delay, and the optimal cloud offloading probability to minimize the average delay and maximize the TCP are jointly analysed numerically. Moreover, an approximated result of the average delay is provided to reduce its computational complexity. The results show that the repulsion in the F-RAN significantly decreases the average delay and increases the TCP, but equipped with the optimal rate threshold and the cloud offloading probability, the effects of repulsion on the average delay and the TCP become trivial. Furthermore, with the optimal cloud offloading probability and rate threshold, the average delay and the TCP can be significantly reduced and improved in the hybrid processing mode compared with those in the local processing mode, respectively. The optimal rate thresholds lie in the range of 3 to 13 Mbps under our simulation environment, which can reduce a maximum of 60% of the average delay and increase a minimum of 0.17 of the TCP.
26 July 2021 in IEEE Antennas and Wireless Propagation Letters
Building structures significantly impact the performance of indoor wireless networks. Specifically, wall penetration attenuates the electromagnetic wave, and blocks both the intended and interference signals. To evaluate the penetration loss in buildings with rectangular wall distribution, an analytical WP model is built. The analytical probability mass function (PMF) of the number of penetrated walls is derived in a closed-form expression and validated by Monte Carlo simulations. The results show that the proposed model has sharper PMF within certain smaller distance range than the PPP wall distribution model. Moreover, the comparisons based on different base station distributions indicate that the proposed model has lower network coverage than the line-of-sight (LoS) probability model and higher network coverage than the PPP wall distribution model in most cases.
25 March 2026 in IEEE Transactions on Wireless Communications
This paper presents a digital over-the-air (OTA) computation architecture that reliably aggregates nomographic functions, e.g., sum, product, maximum, and sum-of-squares—over a fading multiple-access channel. Every sensor quantises its reading through a multiple-level amplitude-shift modulation (ASM) hierarchy whose rectangular QAM grids are jointly optimised by a level-wise, maximum-a-posteriori (MAP) search. The optimisation weighs quantization distortion against MAP–detection error, producing the closed-form expression that accommodates both symmetric and asymmetric (weighted) sum. Asymmetric sum is achieved by means of a greatest-common-divisor lattice alignment. In addition, an equal-split quantization is derived for noise-dominated regimes. Numerical results show that: the proposed digital–OTA design surpasses the analog–OTA baseline on three of the four nomographic tasks by up to 20 dB; under heterogeneous node weights the scheme maintains normalised mean square error (NMSE) $\le 10^{-1}$ throughout, whereas analog OTA degrades sharply. These results confirm that ASM-based hierarchical quantization, combined with MAP-optimal grid selection, provides a versatile and spectrally efficient foundation for next-generation edge learning and federated analytics.