This paper presents a compact antenna which can realize broadband radar-infrared multispectral stealth. The antenna consists of a dual-layer structure: the top layer is an infrared shielding layer (IRSL) made up of periodically arranged square metal patches, while the bottom layer is a radar scattering layer (RSL) comprised of a checkerboard pattern of polarization conversion metasurface elements. The patch antenna is located in the central area of the RSL. At the central working frequency of 5 GHz, the overall dimensions of the antenna are 2×2×0.09λ0. Measured results show that the proposed antenna operates within the 4.75-5.36 GHz band, achieving a maximum gain of 8.6 dB near 5.1 GHz. When the electromagnetic wave is vertically incident along the x and y polarization directions, the radar cross section (RCS) reduction exceeds 8 dB within the 4.44-12.76 GHz frequency range (94.5%) and 10 dB within the 4.45-12.62 GHz frequency range (85.5%). Moreover, the proposed antenna’s average infrared emissivity is 0.21. Experimental results show that antenna can control radiative thermal effectively, leading to a significant decrease in the apparent temperature observed under a thermal imager.
22 July 2024 in IEEE Antennas and Wireless Propagation Letters
This paper proposes a monostatic backscatter communication system with enhanced isolation between excitation and receiver. This enables a mechanism akin to simultaneous co-frequency full-duplex operation, allowing the receiver to effectively amplify and quantify the weak reflected backscatter signals, subsequently demodulating them to extract valid data. Compared to RFID systems, which also employ monostatic backscatter communication, this approach can substantially extend the effective communication range. Furthermore, the exciting source and receiver are integrated in the same system, which makes the base-station system's framework compatible with a common WiFi router. Meanwhile, the communication power consumption of the remote node is significantly decreased
We fabricated a high-performance InAs/GaSb type-II superlattice infrared detector. The tolerance of various sizes of detector irradiated with 1-MeV electrons was characterized. X-Ray Diffraction (XRD) and Atomic Force Microscope (AFM) measurements demonstrated the high quality of the materials. The response spectrum had a 50% cutoff wavelength of 8.85 μm. Irradiation with 1-MeV electrons caused a significant increase in the dark current density from 2.54 × 10−3 to 2.58 × 10−1 A/cm2 at Vb = –0.03 V. The 1-MeV electron irradiation mainly caused displacements in the device, which had a significant impact on the generation-recombination dark current and surface leakage current.
19 August 2025 in IEEE Transactions on Antennas and Propagation
This paper presents three compact differentially-fed, self-resonant, mixed-multipole antenna (MMA) designs that achieve superdirective performance while maintaining high overall efficiency (OE) values. Symmetric coupled resonators are utilized to facilitate configurations in which precise control of their current magnitude and phase distributions is obtained. A “structure-mode-impedance” co-design methodology is developed that bestows the elements in these MMAs with optimal reactive loading characteristics to realize their exceptional impedance match to a 50-Ω source. Three related single-feed topologies and their design evolution are reported: a two-element electrically small MMA with an OE = 91.8% and peak directivity Dmax = 7.32 dB that exceeds the Harrington ka-directivity bound, DHarrington = (ka)2 + 2 ka, by 2.81 dB; a compact three-element MMA with OE = 82.2% and Dmax = 10.09 dB that exceeds DHarrington by 4.38 dB, and an electrically small three-element MMA with OE = 78.8% and Dmax = 8.59 dB that exceeds DHarrington by 3.88 dB. The consequent peak realized gains of these MMAs are outstanding. Experimental prototypes of all three MMAs were fabricated; the measured results confirm their extraordinary radiation performance characteristics. They establish MMAs as excellent candidates for narrow-band Internet of Things (IoT), wireless sensors, and portable terminal applications.