Understanding the mechanism of steam-induced dealumination of zeolite catalysts is of high relevance for tuning their performance and stability in multiple industrial processes. A combination of 27Al and 1H-1H double-quantum single-quantum magic angle spinning nuclear magnetic resonance and diffuse-reflectance ultraviolet-visible spectroscopies identified a preferential dealumination of tetrahedral aluminum sites in H-ZSM-5 zeolites. Framework aluminum atoms facing channels display reactivity toward steam higher than that of those in their intersections. Dealumination randomly occurs on isolated and proximate sites. However, the concentration of the latter sites decays more prominently. These findings contribute to a better understanding of the stability of zeolite catalysts in the presence of steam.
11 July 2023 in Angewandte Chemie International Edition
Cu‐exchanged mordenite (MOR) is a promising material for partial CH4 oxidation. The structural diversity of Cu species within MOR makes it difficult to identify the active Cu sites and to determine their redox and kinetic properties. In this study, the Cu speciation in Cu‐MOR materials with different Cu loadings has been determined using operando electron paramagnetic resonance (EPR) and operando ultraviolet‐visible (UV/Vis) spectroscopy as well as in situ photoluminescence (PL) and Fourier‐transform infrared (FTIR) spectroscopy. A novel pathway for CH4 oxidation involving paired [CuOH]+ and bare Cu2+ species has been identified. The reduction of bare Cu2+ ions facilitated by adjacent [CuOH]+ demonstrates that the frequently reported assumption of redox‐inert Cu2+ centers does not generally apply. The measured site‐specific reaction kinetics show that dimeric Cu species exhibit a faster reaction rate and a higher apparent activation energy than monomeric Cu2+ active sites highlighting their difference in the CH4 oxidation potential.
Cu‐exchanged mordenite (MOR) is a promising material for partial CH4 oxidation. The structural diversity of Cu species within MOR makes it difficult to identify the active Cu sites and to determine their redox and kinetic properties. In this study, the Cu speciation in Cu‐MOR materials with different Cu loadings has been determined using operando electron paramagnetic resonance (EPR) and operando ultraviolet‐visible (UV/Vis) spectroscopy as well as in situ photoluminescence (PL) and Fourier‐transform infrared (FTIR) spectroscopy. A novel pathway for CH4 oxidation involving paired [CuOH]+ and bare Cu2+ species has been identified. The reduction of bare Cu2+ ions facilitated by adjacent [CuOH]+ demonstrates that the frequently reported assumption of redox‐inert Cu2+ centers does not generally apply. The measured site‐specific reaction kinetics show that dimeric Cu species exhibit a faster reaction rate and a higher apparent activation energy than monomeric Cu2+ active sites highlighting their difference in the CH4 oxidation potential.
Cu-exchanged zeolites are extensively studied for their promising properties in the direct and selective conversion of CH4 to CH3OH at low temperatures. Their performance has been attributed to the presence of multiple oxygenated Cu(II) active sites, which can co-exist in a given zeolite framework. Most emphasis has been placed on identifying these Cu-oxo centers, understanding their structural development during reaction with CH4, and establishing a correlation between the Cu speciation and the zeolite's Cu loading, Si/Al ratio, and topology. On the contrary, the processes underlying the oxidative formation of Cu(II) active sites have received comparatively little attention. This critical review presents an overview of the current understanding of the generation of Cu(II) active centers and highlights the impact of the oxidant type and the reaction conditions on the nature of the formed Cu(II) species. Key knowledge gaps are identified by addressing prevailing misconceptions and conflicting reports in the literature. To remedy these issues, strategies are proposed to resolve discrepancies and to gain new insight into the processes preceding the CH4-to-CH3OH conversion in Cu-exchanged zeolites, aiming to better understand and control the generation of these Cu(II) active sites in zeolites.
The methanol-to-hydrocarbons conversion over unidimensional 10-membered ring zeolites offers an attractive route to produce C 3 –C 5 alkenes, central building blocks for the production of sustainable aviation fuels. However, the application of such zeolites is limited by a rapid deactivation due to coke formation. We present a novel catalyst design concept to significantly enhance coke resistance, achieved by physically mixing the zeolite with a secondary catalyst component exhibiting hydrogenation activity and operating under near ambient-pressure hydrogen co-feeds. Among the tested materials, Pd/SiO 2 provides the highest stability enhancement, leading up to 10× higher cumulative productivity of C 3 –C 5 alkenes, and outperforming a bifunctional Pd-loaded zeolite. The enhancement is observed across a broad range of hydrogen concentrations and zeolite:Pd/SiO 2 weight ratios, offering flexibility to minimize hydrogen and Pd use. Kinetic and spectroscopic investigations reveal that Pd intercepts coke-forming intermediates, such as formaldehyde and dienes, thereby reducing the rate of internal and external coke deposition.