A new method for the measurement of the linewidth enhancement factor of semiconductor lasers is presented, based on the interferometric self-mixing effect. It is a fast and easy to perform method that does not require radio frequency nor optical spectrum measurements. A small fraction of the emitted light is backreflected into the laser cavity by a remote target driven by a sine waveform. The mixing of the returned and the lasing fields generates a modulation of the optical output power in the form of an interferometric waveform, with a shape that depends on the optical feedback strength and the linewidth enhancement factor /spl alpha/, according to the well-known Lang-Kobayashi theory. We show that the value of /spl alpha/ can be retrieved from a simple measurement of two characteristic time intervals of the interferometric waveform. Experimental results obtained on different laser diodes show an accuracy of /spl plusmn/6.5%.
21 November 2002 in Measurement Science and Technology
We present a new method for the measurement of the absolute distance of a remote target based on the laser diode self-mixing interferometry technique, which is assisted by an electronic feedback loop that is capable of improving the measurement accuracy. The feedback loop supplies a periodic change of the emitted wavelength that exactly corresponds to a single interferometric fringe. This allows the measurement of the target distance with higher accuracy, which, in principle, is limited only by the detection shot noise and not by the fringe quantization error that is typical for the conventional fringe-counting approaches. We developed a prototype that is capable of measuring the target distance with 0.3-mm accuracy in the 0.2- to 3-m range.
We report on fabrication and characterization of single-longitudinal- and transverse-mode semiconductor ring lasers. A bifurcation from bidirectional stable operation to a regime with alternate oscillations of the counterpropagating modes was observed experimentally and is theoretically explained through a two-mode model. Analytical expressions for the onset and the frequency of the oscillations are derived, and curves numerically evaluated. Good quantitative agreement between theory and measurements made over a large number of tested devices is obtained.