5 July 2019 in Journal of Materials Chemistry A
Solar steam generation by direct harvesting of light irradiation has emerged as one of most efficient technologies for utilization of solar energy and production of fresh water. Herein, we report the fabrication of a novel solar steam generation system based on a blank hollow spacer fabric (BHSF) prepared by filling spaces with chitosan and coating with reduced graphene oxide on the surface. Based on its porous textile fabric structure, with excellent thermal insulation, the modified BHSF shows better performance for water transport and mechanical properties, with a compression strength of up to 733 kPa at 70% strain and low thermal conductivity (0.08 W m−1 K−1). Under solar light power of 1 kW m−2, this solar generator gives an evaporation efficiency of 86%, which is comparable to the best performance for multilayer systems that have been reported so far. More significantly, the unique hollow structure of BHSF, with an aligned big channel array (2 mm in size), which provided additional low-tortuosity pathways, endows the modified BHSF with excellent salt-resistant properties, such as evaporation in high saline solution. Such a textile-based BHSF may hold great potential for scalable manufacture of a cost-efficient solar still with excellent mechanical flexibility, physicochemical robustness and high solar energy conversion efficiency for a variety of applications, including power generation, desalination, and steam sterilization.
15 March 2019 in Journal of Materials Chemistry A
‘Kapok fiber-PPy aerogels were prepared by using polypyrrole modification of the Ca2+ crosslinked kapok fiber aerogels. The kapok fiber-PPy aerogels show excellent light absorption, high porosity and mechanical strength’. As a solar steam generator a high energy conversion efficiency of 82.4% was obtained under 1 sun illumination.
13 September 2018 in Journal of Materials Chemistry A
The creation of a porous medium with high solar energy harvesting and conversion efficiency as well as desired robustness is essential for construction of an efficient solar steam generation system. Herein, we report the first example of conjugated microporous polymer (CMP) aerogel-based solar steam generators, which were synthesized by using 1,3,5-triethynylbenzene, 1,4-dibromobenzene and 4,4′-dibromobiphenyl as building blocks through Sonogashira–Hagihara cross-coupling reaction. The resulting CMP aerogels show high porosity of greater than 94%, owing to their porous three-dimensional network architecture which is constructed by CMP nanotubes with diameters of ca. 100 nm. The CMP aerogels possess low thermal conductivity (0.022 W m−1 K−1) and exceptional mechanical properties with a compressive strength of up to 0.54 MPa under loading of 75% strain. Solar steam generation efficiencies of up to 81%, 85% and 88% are achieved at light intensities of 1 kW m−2, 2 kW m−2 and 3 kW m−2, respectively. The findings of this study may provide a new opportunity for rational design and construction of new CMP-based solar steam generators due to the designable flexibility of CMPs which makes it possible to fine tune both porosity and chemical composition of the resulting CMP product only by varying the CMP building blocks through a simple one-pot reaction.
4 July 2019 in Journal of Materials Chemistry A
Solar vapor generation based on light-to-heat conversion via photothermal materials has been considered as one of the emerging technologies for utilizing solar energy. Here, we report the fabrication of a novel monolithic aerogel (PNGA) composed of hydrophilic treated MnO2 nanowires and reduced graphene oxide (rGO) followed by in situ coating of polypyrrole on the surface of the PNGA to construct a light-to-heat conversion layer for efficient solar steam generation. Analysis of the morphology and porosity of the PNGA shows that the aerogel is full of interconnected pores and open channels with a low apparent density (0.127 g cm−3) and large specific surface area (1142.7 m2 g−1), which endow it with excellent thermal insulation (a low thermal conductivity of 0.21882 W m−1 K−1 in the wet state), self-floating and rapid water transmission properties. Benefiting from the polypyrrole coating, the PNGA shows a superintense optical absorption of ca. 100%. Interestingly, a superhydrophilic wettability could be achieved after surface modification of the PNGA with phytic acid, which could dramatically enhance its water transportation ability. Furthermore, the PNGA maintains a certain mechanical strength (0.08 MPa under 30% strain), thus making it mechanically robust to withstand the harsh environment. Taking the advantages mentioned above, our PNGA possesses an outstanding energy conversion efficiency of 93.8% under 1 kW m–2 irradiation, which is 4.9 times that of pure water (19.1%). In addition to the excellent ionic isolation and dye liquid treatment ability, the PNGA shows excellent stability and its energy conversion efficiency remains nearly unchanged after ten consecutive tests. Based on its excellent mechanical stability and high recyclability and a simple and scalable manufacture process, our PNGA sample may have great potential as an efficient photothermal material for a wide range of large-scale applications such as solar steam generation, wastewater treatment, seawater desalination and so on.
6 April 2018 in Journal of Materials Chemistry A
The development of high performance flame retardant materials with better thermal insulation properties is of great importance for saving energy in modern building construction. Herein, we report for the first time the synthesis of novel conjugated microporous polymers (CMPs) using monomers containing a benzotriazole moiety as building blocks via Sonogashira–Hagihara cross-coupling polymerization. The synthesized ZCMPs show high thermal stability with a decomposition temperature above 330 °C and high specific surface area up to 691 m2 g−1. The resulting CMP samples possess excellent flame retardancy with a peak heat release rate (pHRR) as low as 9.9 W g−1, which is nearly one order of magnitude lower than those of many traditional polymeric flame retardants reported previously. Also, they also show better thermal insulation properties with a thermal conductivity of ca. 0.03 W m−1 K−1 in air. More importantly, the introduction of a benzotriazole moiety into CMPs could generate nitrogen (a “green” gas compared with many flame retardants) to produce a flame-retardant effect. In addition, the rigid porous structure of CMPs could nearly remain to form a carbon layer as a barrier to block oxygen, mass, and heat transfer to the substrate when it undergoes high temperature treatment. Considering the advantages mentioned above, CMPs may hold great potential for future thermal insulation and flame retardant applications.
10 May 2017 in Journal of Materials Chemistry A
Herein, two conjugated microporous polymers (CMPs) containing dual heteroatoms (named as CMPSNs) were synthesized using 4,7-dibromobenzo[c][1,2,5]thiadiazole and alkynyl monomers as the building blocks though a Sonogashira–Hagihara cross-coupling reaction for the efficient removal of antibiotics from water. Fourier transform infrared spectroscopy (FT-IR), 13C CP/MAS solid-state NMR, ultraviolet (UV) adsorption spectroscopy and fluorescence spectroscopy were used to confirm the structure of the resulting CMPSNs. Under our synthesis conditions, CMPSNs with interesting morphologies were obtained, where the macroscopically porous network structure was composed of aggregated hierarchical micrometre-sized microporous spheres. Employing tetracycline as a model antibiotic, for the first time, the performance of the CMPSNs for the removal of tetracycline from water was systematically investigated. The results of the adsorption kinetics of tetracycline showed that the adsorption mechanism of the resulting polymers followed a pseudo-second-order model. Moreover, the adsorption behaviour of CMPSNs for tetracycline fitted well with the Freundlich model. In addition, the adsorption thermodynamics indicated that the adsorption is an endothermic process, and it was also found that the temperature was beneficial to the adsorption and that the adsorption process was spontaneous. The findings obtained from this work make the CMPSNs promising candidates for the capture of tetracycline, which may open a new opportunity to address certain environmental issues, especially from the global-scale severe water pollution arising from antibiotics.