24 February 2021 in Advanced Energy and Sustainability Research
With the climate crisis gathering recognition, there has been significant interest in clean energy. As a reliable and clean energy solution, markets transitioning toward sustainable energy have identified polymer electrolyte membrane fuel cells (PEMFCs) as a critical technology. The increasing interest in PEMFCs is primarily due to their high energy density, high efficiency and zero greenhouse gas emission. However, additional development is required to overcome the current barriers associated with fuel cell component design, high manufacturing cost, and insufficient stability. Bioinspired designs have the potential to provide new and valuable insights using novel techniques for extracting design inspirations from biological structures. Applying these design concepts to develop materials and structures for various fuel cell components can be transformative. The well‐adapted structures and functional features of biological systems have been proven to greatly enhance the performance of current designs through novel and optimized pathways. Bioinspired designs have indeed lived up to performance expectations and even exceed them. Herein, the potential and value of using these bioinspired designs are discussed. Recent studies and advancements based on nature‐inspired structures for components of PEMFCs and how these design considerations substantiate their claim as an attractive alternative to conventional designs are discussed.
13 September 2025 in ACS Omega
In recent years, significant efforts have been devoted to the reduction of sulfur levels in transportation fuels in order to reach regulatory limits and reduce the emission of harmful SO x into the atmosphere. In particular, adsorptive desulfurization (ADS) has the potential to produce zero-sulfur fuels without the need for a high energy intensity process, high H2 pressure, and long process times as in the case of other technologies such as hydrodesulfurization. In this work, we have demonstrated the effectiveness of renewable activated carbons derived from food waste (FWAC) for the ADS of model jet and diesel fuels. The optimal FWAC materials were those fabricated to maximize the micropore volume, providing available sites for the adsorption of dibenzothiophene (DBT) and dimethyldibenzothiophene (DMDBT). The FWAC had a greater sulfur adsorption capacity than commercial AC, Y zeolite sorbents, and AC derived from other biomass sources including miscanthus, coconut shell, and walnut shell. Elemental analysis suggests that the inorganic impurities inherent in food waste, notably K, Ca, P, and Na, may contribute to its improved sulfur adsorption compared to other AC materials. Microscopy and X-ray diffraction studies further demonstrated the presence of inorganic species on FWAC that may provide active sites for the chemisorption of sulfur molecules.
2 April 2026 in Journal of Power Sources
9 February 2026 in SSRN Electronic Journal
Anodes of proton exchange membrane water electrolyzers (PEMWEs) operate under strongly oxidizing conditions, imposing stringent durability requirements on porous transport layers (PTLs). Although metallic coatings are widely used to mitigate titanium passivation and interfacial resistance growth, their stability is typically assessed using disparate, material-specific protocols that limit cross-comparison and standardization. This methodological gap hinders the development of cost-effective alternatives to platinum group metal (PGM) coatings. Here, we introduce a rapid electrochemical method to evaluate PTL coating durability under PEMWE-relevant conditions. The approach employs time-resolved impedance spectroscopy during sustained anodic polarization, focusing on the evolution of low-frequency resistance (LFR) and phase behavior. A central outcome is the definition of a dimensionless Passivation Index (PI), derived from the temporal evolution of LFR, enabling quantitative comparison of degradation kinetics independent of geometric surface area. Using uncoated and Pt-, Au-, and Nb-coated titanium PTLs as model systems, we show that LFR sensitively captures interfacial transport limitations associated with passivation, while inductive impedance features provide diagnostic of active corrosion and coating instability. This method enables rapid discrimination between stable, passivating, and actively corroding interfaces without reliance on material-specific equivalent circuit models or full-cell testing, offering a pathway toward standardized durability screening of electrolyzer materials.