16 October 2018 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Approximate multipliers enable the saving of area and power for implementation of many modern error-resilient compute-intensive applications. In this paper, we first propose a novel error-configurable minimally biased approximate integer multiplier (MBM) design. The proposed MBM design is devised by coupling a unique error-reduction mechanism with an approximate log based integer multiplier. Next, we propose an optimization (by removing leading-one detection and barrel shifting logic) of the MBM and a class of state-of-the-art approximate integer multipliers (DRUM and SSM), so that they can be efficiently used in approximate floating-point (FP) multipliers. Then, we propose a set of new approximate FP multipliers and we show that these FP multipliers lie on the Pareto front on the design spaces of area versus error and power versus error. We synthesize the designs using the TSMC 45-nm standard-cell library. Results show that the MBM integer design offers optimal points in the design space, offering up to 75% area reduction and 84% power reduction with <0.1% error bias, when compared with the accurate version. The proposed approximate FP multipliers offer better error-efficiency tradeoffs than traditional precision scaling. The FP design space can offer up to $57 \times $ power and $28 \times $ area improvement for less than 25% peak error, 7% mean error, and 4% error bias, when compared with the IEEE-754 single-precision FP multiplier. We also perform application-level evaluations of the proposed approximate integer and FP multipliers, showing that our proposed multipliers enable significant power and area reduction with minimal degradation in applications’ output quality.
8 November 2016 in ACM Computing Surveys
Today, soft errors are one of the major design technology challenges at and beyond the 22nm technology nodes. This article introduces the soft error problem from the perspective of processor design. This article also provides a survey of the existing soft error mitigation methods across different levels of design abstraction involved in processor design, including the device level, the circuit level, the architectural level, and the program level.
3 July 2023 in GigaScience
Background: Third-generation nanopore sequencers offer selective sequencing or “Read Until” that allows genomic reads to be analyzed in real time and abandoned halfway if not belonging to a genomic region of “interest.” This selective sequencing opens the door to important applications such as rapid and low-cost genetic tests. The latency in analyzing should be as low as possible for selective sequencing to be effective so that unnecessary reads can be rejected as early as possible. However, existing methods that employ a subsequence dynamic time warping (sDTW) algorithm for this problem are too computationally intensive that a massive workstation with dozens of CPU cores still struggles to keep up with the data rate of a mobile phone–sized MinION sequencer. Results: In this article, we present Hardware Accelerated Read Until (HARU), a resource-efficient hardware–software codesign-based method that exploits a low-cost and portable heterogeneous multiprocessor system-on-chip platform with on-chip field-programmable gate arrays (FPGA) to accelerate the sDTW-based Read Until algorithm. Experimental results show that HARU on a Xilinx FPGA embedded with a 4-core ARM processor is around 2.5× faster than a highly optimized multithreaded software version (around 85× faster than the existing unoptimized multithreaded software) running on a sophisticated server with a 36-core Intel Xeon processor for a SARS-CoV-2 dataset. The energy consumption of HARU is 2 orders of magnitudes lower than the same application executing on the 36-core server. Conclusions: HARU demonstrates that nanopore selective sequencing is possible on resource-constrained devices through rigorous hardware–software optimizations. The source code for the HARU sDTW module is available as open source at https://github.com/beebdev/HARU, and an example application that uses HARU is at https://github.com/beebdev/sigfish-haru.
17 July 2008 in Design Automation for Embedded Systems