Ramanujam Radhakrishnan

Ramanujam Radhakrishnan

Auto-generated profile, based on publicly available information

Ramanujam Radhakrishnan

Vellore Institute of Technology

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2017 in Journal of Advanced Research
Verified
Journal Article
Open access
Kannan ChidambaramKannan Chidambaram
Kannan Chidambaram
RRR. Ramanujam
R. Ramanujam
In this research work, a comparative evaluation on the mechanical and microstructural characteristics of aluminium based single and hybrid reinforced nanocomposites was carried out. The manufacture of a single reinforced nanocomposite was conducted with the distribution of 2 wt.% nano alumina particles (avg. particle size 30-50 nm) in the molten aluminium alloy of grade AA 7075; while the hybrid reinforced nanocomposites were produced with of 4 wt.% silicon carbide (avg. particle size 5-10 µm) and 2 wt.%, 4 wt.% nano alumina particles. Three numbers of single reinforced nanocomposites were manufactured through stir casting with reinforcements preheated to different temperatures viz. 400 °C, 500 °C, and 600 °C. The stir cast procedure was extended to fabricate two hybrid reinforced nanocomposites with reinforcements preheated to 500 °C prior to their inclusion. A single reinforced nanocomposite was also developed by squeeze casting with a pressure of 101 MPa. Mechanical and physical properties such as density, hardness, ultimate tensile strength, and impact strength were evaluated on all the developed composites. The microstructural observation was carried out using optical and scanning electron microscopy. On comparison with base alloy, an improvement of 63.7% and 81.1% in brinell hardness was observed for single and hybrid reinforced nanocomposites respectively. About 16% higher ultimate tensile strength was noticed with the squeeze cast single reinforced nanocomposite over the stir cast.

1 January 2013 in Procedia Engineering
Verified
Journal Article
Open access
LMLohithaksha M. Maiyar
Lohithaksha M. Maiyar
RRR. Ramanujam
R. Ramanujam
KVK. Venkatesan
K. Venkatesan
JJJ. Jerald
J. Jerald
This study investigated the parameter optimization of end milling operation for Inconel 718 super alloy with multi-response criteria based on the taguchi orthogonal array with the grey relational analysis. Nine experimental runs based on an L9 orthogonal array of Taguchi method were performed. Cutting speed, feed rate and depth of cut are optimized with considerations of multiple performance characteristics namely surface roughness and material removal rate. A grey relational grade obtained from the grey relational analysis is used to solve the end milling process with the multiple performance characteristics. Additionally, the analysis of variance (ANOVA) is also applied to identify the most significant factor. Finally, confirmation tests were performed to make a comparison between the experimental results and developed model. Experimental results have shown that machining performance in the end milling process can be improved effectively through this approach

1 January 2014 in Procedia Engineering
Verified
Journal Article
Open access
JJJOHNY JAMES
JOHNY JAMES
KVK. Venkatesan
K. Venkatesan
PKP. Kuppan
P. Kuppan
RRR. Ramanujam
R. Ramanujam

1 April 2016 in Optics & Laser Technology
Verified
Journal Article
Closed access
KVK. Venkatesan
K. Venkatesan
RRR. Ramanujam
R. Ramanujam
PKP. Kuppan
P. Kuppan

1 January 2014 in Procedia Engineering
Verified
Journal Article
Open access
KVK. Venkatesan
K. Venkatesan
RRR. Ramanujam
R. Ramanujam
PKP. Kuppan
P. Kuppan
High strength alloys such as nickel and titanium and advanced engineering materials such as ceramics, composites are being developed and widely used in aerospace, automotive, medical and nuclear industries due its inherent physical-mechanical properties. However conversion these new materials into engineering products are always associated with machining. The machinability characteristics such as higher cutting force, higher cutting temperature, poor surface integrity and shorter tool life associated with these materials posing many challenges to the researchers, and hence considered as difficult to cut materials. Conventional methods of machining these materials are found to be uneconomical. In recent days, many attempts have been made to improve the machinability of these materials more effectively via use of external energy assisted machining. Among the various external energy assisted machining methods, laser assisted machining (LAM) has received the attention of researchers in the metal cutting domain and a few research was carried during the recent years. This paper is aimed to review and summarize the potential use of LAM for difficult to cut materials, current progress, benefits and challenges in laser assisted machining. In addition an optimization frame work to study the effect of laser parameters and machining process parameters on machinability performance is not reported which is applicable to industrial processes It is concluded that further experimental modeling and empirical techniques are required to create a predictive based models that gives good agreement with reliable experiments, while explaining the effects of many parameters, for machining of these difficult-to-cut materials

1 August 2011 in International Journal of Precision Engineering and Manufacturing
Verified
Journal Article
Closed access
PDF file
RRRadhakrishnan Ramanujam
Radhakrishnan Ramanujam
NMNambi Muthukrishnan
Nambi Muthukrishnan
RRRamasamy Raju
Ramasamy Raju