1 February 2018 in Advanced Functional Materials
30 September 2019 in Advanced Science
Room‐temperature Na–S batteries are facing one of the most serious challenges of charge/discharge with long cycling stability due to the severe shuttle effect and volume expansion. Herein, a sodium polysulfides defense system is presented by designing and constructing the cathode‐separator double barriers. In this strategy, the hollow carbon spheres are decorated with MoS2 (HCS/MoS2) as the S carrier (S@HCS/MoS2). Meanwhile, the HCS/MoS2 composite is uniformly coated on the surface of the glass fiber as the separator. During the discharge process, the MoS2 can adsorb soluble polysulfides (NaPSs) intermediates and the hollow carbon spheres can improve the conductivity of S as well as act as the reservoir for electrolyte and NaPSs, inhibiting them from entering the anode to make Na deteriorate. As a result, the cathode‐separator group applied to room‐temperature Na–S battery can enable a capacity of ≈1309 mAh g−1 at 0.1 C and long cycling life up to 1000 cycles at 1 C. This study provides a novel and effective way to develop durable room‐temperature Na–S batteries.
6 November 2017 in Chemical Science
A double-hierarchical sulfur host has been synthesized in which hierarchical carbon spheres, constructed from building blocks of hollow carbon nanobubbles used for loading sulfur, are sealed by a polar MoS2 coating that is composed of ultrathin nanosheets (MoS2@HCS composite).
20 November 2018 in Journal of Materials Chemistry A
Poor conductivity and severe volume expansion of sulfur (S) electrode are the key issues for the practical application of room temperature Na–S battery. In this paper, we propose a 3D railway-like electrode design to tackle these problems for room temperature Na–S battery. Nitrogen-doped porous carbon polyhedrons (NPCs) as “station” for loading S are tightly concatenated by 1D carbon nanotubes (CNTs) as “railway” for transporting electrons to form a 3D railway-like network (CNT/NPC) as S host. The 3D cross-linked railway-like network not only facilitates the rapid transfer of electrons for high capacity but also connects the polyhedrons during the cycling maintaining the integrity of the electrode. With this rational design, 3D railway-like S@CNT/NPC electrode shows a high discharge capacity of ∼601 mA h g−1 at 0.5C and outstanding rate capability. In addition, a high capacity of 410 mA h g−1 can still be achieved after 500 cycles with a very low capacity decay rate of 0.064% per cycle.
4 July 2018 in Journal of Materials Chemistry A
Engineering the microstructure at the atomic scale is paramount to developing effective catalysts due to the active sites and mass/charge transfer ability of catalysts severely limited by their microstructure. Herein, we nanoengineer unique necklace-like nanochains composed of molybdenum nitride embedded N-doped carbon, in which the series-wound nanochains are built from hollow beads with a very thin porous wall. MoN nanodots were downsized to 3 nm and uniformly embedded in hollow N-doped porous carbon pearls and wires. The unique hierarchical hollow cavity and ultrathin wall structure of the nanochains offer a high effective reaction chamber, more active sites, and mass/charge transfer for remarkably fast HER. The resultant MoN@NPCNCs exhibit an extremely low HER overpotential of 72 mV at 10 mA cm−2, a low Tafel slope of 53.21 mV dec−1 in an acidic solution, which is far lower than those of MoN embedded N-doped carbon nanofibers (MoN@NPCNFs, 139.21 mV vs. RHE/82.69 mV dec−1), and other previously reported MoN based catalysts. Density functional theory (DFT) calculations reveal that MoN and N-doped carbon synergistically optimizes the free energy of hydrogen adsorption on the active sites. Furthermore, this catalyst also offers an excellent electrocatalytic ability and durability in both neutral and alkaline media.
1 April 2020 in Journal of Colloid and Interface Science