1 February 2014 in Earthquake Spectra
The progressive damage and subsequent demolition of unreinforced masonry (URM) buildings arising from the Canterbury earthquake sequence is reported. A dataset was compiled of all URM buildings located within the Christchurch CBD, including information on location, building characteristics, and damage levels after each major earthquake in this sequence. A general description of the overall damage and the hazard to both building occupants and to nearby pedestrians due to debris falling from URM buildings is presented with several case study buildings used to describe the accumulation of damage over the earthquake sequence. The benefit of seismic improvement techniques that had been installed to URM buildings is shown by the reduced damage ratios reported for increased levels of retrofit. Demolition statistics for URM buildings in the Christchurch CBD are also reported and discussed.
1 December 2013 in Engineering Structures
Hossein Derakhshan, Michael C. Griffith, Jason M. Ingha
1 April 2013 in Journal of Engineering Mechanics
An analytical model is developed to describe the out-of-plane response of one-way spanning unreinforced masonry (URM) walls by investigating the effects of various parameters. Horizontal crack height, masonry compressive strength, and diaphragm support stiffness properties are assumed as variables, and sensitivity analyses are performed to study the influence of these parameters on the cracked wall characteristic behavior. The parametric studies show that crack height significantly influences wall stability by affecting both the instability displacement and the wall lateral resistance. The reduction in cracked wall lateral resistance and in the instability displacement caused by finite masonry compressive strength is shown to be significantly amplified by the applied overburden. A study using the typical configuration of flexible diaphragms and URM walls indicates that the wall top support flexibility does not significantly influence cracked wall out-of-plane response. An existing simplified wall ...
27 July 2016 in Journal of Earthquake Engineering
The effects of diaphragm flexibility on the seismic response of low-rise unreinforced masonry buildings are examined using one-way stiffness- and strength-eccentric single-story systems subjected to unidirectional ground excitation. A wide range of diaphragm stiffnesses are considered. Results show that diaphragm flexibility can induce different effects depending on the configuration of the system and the level of diaphragm flexibility. When diaphragm is relatively stiff, amplified displacement demands can be imposed on the flexible side of the structure. When diaphragm is relatively flexible, peak displacements of in-plane loaded walls generally reduce. A diaphragm classification is developed to capture these salient effects.
1 June 2014 in Journal of Structural Engineering
Not availableHossein Derakhshan, Dmytro Dizhur, Michael C. Griffith, and Jason M. Ingha
1 August 2015 in Structures