1 December 2016 in International Journal of Geomechanics
A series of experiments were performed to investigate the hydraulic and κk(Sr)=bk(1−SrSr−Srirr)1/dk, R=DR, WTmechanical behavior of an unsaturated silt obtained from the Yellow River Delta. To identify the key factors that influence the soil-water characteristics (SWC), an experimental program was designed to study the SWC of the soil at different void ratios and vertical pressures. It was shown that an that that apparent hysteresis phenomenon occurred on the SWC curves when the soil experienced drying/wetting cycles. It was also shown that the influence of void ratio on the SWC was significant, and the stress state influenced the SWC only through changing the void ratio. Isotropic compression tests were conducted at different constant matric suctions, using a suction-controlled double cell triaxial apparatus. The soil under shearing showed apparent dilatant and softening behavior, in a way similar to medium to dense sand. In addition, the hardening effect of matric suction was significant, and b...
1 July 2018 in International Journal of Geomechanics
A soil-water retention curve (SWRC) is one of the important constitutive laws for soil-water distribution and shear-strength assessment in unsaturated soil. A SWRC commonly shows the hysteretic behavior under drying and wetting conditions. Several mathematical models have been developed to describe hysteresis, including a model commonly presented in the literature and implemented into HYDRUS software. Recently, the authors developed a new hydraulic hysteresis model for which only one additional parameter was introduced to capture the effects of capillary and air-entrapment hysteresis. To confirm the capabilities of the two models in analyzing the unsaturated flow, the authors’ model was implemented with a numerical code using the FORTRAN language. The numerical codes including the authors’ model and the model in HYDRUS for hysteresis assessment were used to analyze the same transient unsaturated flow problems under drying and wetting conditions. By comparing the measured data to curves predicted by the two models, the results show that the hysteretic SWRC cannot be described correctly when the effects of hydraulic hysteresis are ignored under drying and wetting conditions. Moreover, the comparison between the results predicted by the two models shows that the authors’ model gave a robust performance for capturing hydraulic hysteresis behavior in unsaturated flow.