1 January 2023 in Physics of Fluids
Turbulent incoming flow conditions are closely matched to the crosswinds experienced by trains in windy areas. Therefore, it is important to investigate how the turbulent inflow affects the flow dynamics around a train. The aerodynamic characteristics of a 1:8-scaled high-speed train at a 90{degree sign} yaw angle was studied based on the Improved Delayed Detached Eddy Simulation (IDDES) turbulence model. Four incoming flow conditions were set using a Synthetic Eddy Method (SEM) turbulent generator, including uniform, Lu = 0.5H, Lu = 1H, and Lu = 2H inflow (Lu is turbulence integral length scale and H is reference height). The aerodynamic loads, surface pressure, mean vorticity, vortex structure, velocity deficit, turbulence characteristics, Reynold stresses, turbulence production term, and anisotropy of turbulence were thoroughly analyzed. Turbulent inflow and increasing inflow Lu increased the standard deviation of the aerodynamic loads on the train. A crisis of inflow Lu appeared around 0.5H, meaning the rolling moment and overturning moment were largest under this crisis condition. Turbulent inflow caused vortices on the train's leeward side to come closer to the train, increasing the vorticity thickness and shortening the back flow region. The Reynolds stresses on the train's leeward side under turbulent inflow conditions were strengthened. The spectrum proper orthogonal decomposition method was used to analyze the dominant mode within the train's leeward region and the corresponding energy distribution in the frequency domain. The aerodynamic admittance function was used to investigate the frequency characteristics of the aerodynamic loads on the train.
1 February 2023 in Physics of Fluids
This study attempts to describe associated fluid dynamics of a square finite wall-mounted cylinder (FWMC) immersed within free-stream turbulent flow characterized by different turbulence intensities and integral length scales. An improved delayed detached eddy simulation method is adopted to numerically reproduce the fully developed turbulent flow fields. The results reveal that both the turbulence intensities and integral length scales have a significant effect on the separated shear layers, base pressure, and associated aerodynamic forces of the cylinder. Constrained streamlines along with critical point techniques are employed to further illustrate the influence of parameters of interest on a time-averaged flow pattern, including horseshoe vortex, surface flow, and wake topology. Distribution of second-order statistics within the wake region shows a shorter longitudinal length of the reversed flow region and enhanced vortex strength when background turbulence intensity increases. The time-dependent interaction between background turbulence and separated flow around the square FWMC is illustrated based on the phase difference between pressure of opposing side faces and the evolution of the reverse-flow region. In the end, the spectral proper orthogonal decomposition technique is employed to further investigate the effects of incoming flow turbulence on characteristics of the free-end shear flow and Von Kármán vortex shedding in the wake.
1 March 2024 in Physics of Fluids
The turbulence intensity and yaw angle of crosswinds exert a substantial impact on the aerodynamic characteristics of trains traveling in windy regions. It is urgent to study how the yaw angle and turbulence intensity of incoming flow jointly affect the aerodynamic characteristics of the train and the corresponding flow field under turbulent crosswind. A high-speed train scaled at a ratio of 1/8 of its actual size at different yaw angles was investigated. Three inflow conditions were adopted, including uniform inflow, Iu = 0.05 inflow, and Iu = 0.2 inflow (Iu is turbulence intensity). The turbulent inflow was generated by the synthetic eddy method. The instantaneous and time averaged characteristics of aerodynamic loads and pressure loads of the train were analyzed. The vortex structures, vorticity, swirling strength, mean velocity, reverse flow, and Reynolds stresses are analyzed to explore the flow pattern and flow evolution. The results found that the fluctuation of the aerodynamic loads, the average side fore, and the average rolling moment of the train are remarkably enhanced under turbulent inflow. These results stem from the alterations in the flow field around the train induced by turbulent inflow, consequently leading to variations in surface pressure on the train. As the turbulence intensity of the inflow increases, the stability of the vortex structures decreases, and the position of the large-scale vortex structure has been changed. Moreover, the yaw angle (β) exerts a more significant influence on the vortex structure's flow pattern on the leeward side compared to the inflow turbulence intensity.
18 October 2024 in Alexandria Engineering Journal
15 July 2025 in Journal of Wind Engineering and Industrial Aerodynamics
1 March 2025 in Physics of Fluids
Flow control of cylinders aimed at drag reduction or vibration suppression has been widely studied. Sweeping jet is a novel flow control method that has been applied to airfoil and other bluff bodies. This paper numerically investigates the flow control effects of sweeping jets on a cylinder at a Reynolds number of 5 × 104 using large Eddy simulation. Various parameters such as jet angle, jet momentum coefficient, and the arrangement configuration of fluidic oscillators are examined for their influence on flow control effectiveness. The results demonstrate that sweeping jets significantly reduce the cylinder's drag, mitigate lift fluctuations, suppress vortex shedding, and extend the length of the recirculation region. The optimal jet angle is 70°, and at a jet momentum coefficient of 3.4 × 10−3, the drag reduction reaches a maximum of 47%, while the standard deviation of the lift decreases by 92.2%. As the jet momentum coefficient increases, the drag reduction factor (defined as the ratio of the reduced drag to baseline drag) rises. However, when the coefficient exceeds 3.4 × 10-3, the drag reduction rate decreases significantly, accompanied by changes in the wake flow pattern. Besides, the arrangement density of the fluidic oscillators also plays a crucial role in flow control effectiveness. Furthermore, the interaction between the sweeping jets and incoming flow is examined. The sweeping jets upstream of the separation point exchange momentum with the boundary layer, enhancing stability and suppressing separation. The closer the jets are to the separation point, the more effective the suppression.