18 June 2019 in Optics Letters
We introduce a new method of the fabrication of surface nanoscale axial photonic (SNAP) microresonators through strong bending of an optical fiber. We experimentally demonstrate that geometric deformation and refractive index variation induced by bending is sufficient for the formation of a SNAP bottle resonator with nanoscale effective radius variation (ERV) along the fiber axis. In our experiment, we bend the optical fiber into a loop and investigate the properties of the fabricated tunable bottle resonator as a function of the loop dimensions. We find that the introduced ERV is approximately proportional to the local curvature of the loop, while the ERV maximum is proportional to the maximum of the loop curvature squared. The advantages of the demonstrated method are its simplicity, robustness, and ability to mechanically tune introduced resonant structures. This is of crucial importance for the creation of robust and tunable SNAP devices for applications in optical classical and quantum signal processing and ultraprecise sensing.
21 April 2022 in Physical Review B
Photonic bound states in the continuum (BIСs) were investigated depending on material and radiation losses on the example of the phase-change chalcogenide and two types of resonators in the form of a cylinder and a ring which support quasi-BIC according to the Friedrich-Wintgen mechanism. The complex refractive index for the amorphous and crystalline phases of was measured experimentally. It was found that as the material losses increase, the quasi-BIC becomes practically a dark mode, while the usual resonator eigenmodes continue to remain intense. At the same time the strength of the mode coupling has been not affected, that is, the Rabi splitting remains unchanged in the studied range of losses. Photonic mode switching during the amorphous-crystalline phase transition was also investigated and two mechanisms were identified, including an efficient Fano resonance mechanism that can be used in real devices.