29 December 2021 in IEEE Transactions on Antennas and Propagation
In multi-band shared-aperture base station antennas, cross-band mutual couplings always lead to unwanted radiation characteristics. In this paper, influence of the cross-band mutual coupling is investigated from the point view of induced currents and its secondary radiation fields. A low-band (L-band, 0.76-0.88 GHz) cascade comb dipole antenna is proposed to passively cancel the induced current and therefore suppress the secondary radiation field. Owing to the passive current cancellation capability, the proposed L-band cascade comb antenna does not affect the radiation performance of the middle-band (M-band, 1.9-2.7 GHz) and high-band (H-band, 3.3-3.9 GHz) antennas in stacked multi-band shared-aperture antenna arrays. The proposed L-band antenna are thus electromagnetic-transparent to the M-band and H-band antennas. Based on the novel electromagnetic-transparent cascade comb dipole antenna, a triple-band shared-aperture antenna array that consists of the L-band, M-band, and H-band antennas are developed, manufactured and measured. Both simulated and measured results validate the attractive features of the cascade comb dipole antenna in multi-band shared-aperture massive MIMO base station antenna array developments.
10 May 2021 in International Journal of RF and Microwave Computer-Aided Engineering
Owing to the high cross‐polarization discrimination (XPD) and high isolation characteristics, differential excitation is often employed in dual‐polarized microstrip antennas. However, the number of excitation ports will be doubled, and the power dividers in the differential circuit will introduce additional loss, the differential excitation scheme is thus not suitable for dual‐polarized large‐scale MIMO antenna arrays. In this work, a novel dual‐polarized stacked microstrip antenna with trident‐shaped baluns is proposed for base station MIMO array development. The trident‐shaped balun is proposed to replace the traditional differential excitation structures, while keeping the merits of high XPD and high isolation. The proposed antenna operates in the frequency band of 3.3‐3.8 GHz. The profile height of the antenna is only 0.09λ0 (λ0 is the free‐space wavelength at the central frequency), which is much lower than traditional base station antennas (0.25λ0) in the sub‐6 GHz band. Moreover, a defective ground structure is implemented in a 2 × 2 MIMO antenna array to efficiently suppress the mutual coupling among antenna elements. Both simulated and measured results validate the design. Owing to its low‐profile height and low mutual coupling characteristic, the proposed design is a good candidate for sub‐6 GHz band base station MIMO array developments.
1 July 2024 in IET Microwaves, Antennas & Propagation
A dual‐band shared‐aperture antenna array is presented, involving a combined scheme to suppress mutual coupling interference. The proposed array is comprised of a low‐band (LB) antenna, a frequency selective surface (FSS), sixteen high‐band (HB) antennas, and a reflector. The LB antenna utilises electromagnetic transparent (ET) characteristics to minimise scattering interference, while the FSS isolates resonance interference and port signal interference. The combined scheme integrates the benefits of both the ET antenna and FSS to suppress mutual coupling interference effectively. A prototype of the proposed antenna was fabricated and measured, operating at 1.7–2.7 GHz and 3.3–3.9 GHz. The simulated and measured results demonstrate stable patterns for both the LB antenna and the HB antennas. The cross‐band isolation is higher than 28 dB in the low‐band. With these advantages, the antenna array is suitable for base station applications.
8 July 2025 in IEEE Antennas and Wireless Propagation Letters
Shared-aperture antenna arrays are promising for the integration of multiple antenna array apertures in a limited space, ensuring sufficient frequency bandwidth and angular coverage. However, these arrays often suffer from serious cross-band coupling, leading to deterioration in radiation performance. This letter proposes a novel balun integrated with miniaturized open-circuited stubs. By cascading multiple quarter-wavelength open stubs and strategically bending them to fit the maximum width, the proposed balun introduces transmission zeros that provide filtering capability for electromagnetic interference from other frequency bands. An equivalent circuit model is then developed to facilitate the integration of the balun with the antennas. With the novel miniaturized filtering balun and the equivalent circuit model, a triple-band antenna array for the fifth-generation base stations is developed. A prototype is fabricated and measured to validate the effectiveness of the proposed approach. Measured results illustrate that the isolation between the low-band (0.69-0.96 GHz) and middle-band (1.90-2.70 GHz) is improved from 18.0 dB to 32.0 dB in the middle-band, and the isolation between the low-band and high-band (3.30-3.90 GHz) is improved from 25.0 dB to 36.0 dB in the high-band.