22 January 2022 in Composites Part B: Engineering
23 March 2023 in Composites Part A: Applied Science and Manufacturing
10 March 2025 in International Journal of Solids and Structures
20 November 2024 in Journal of Intelligent Material Systems and Structures
The present article is concerned with modeling the viscoelastic behavior of Polydimethylsiloxane (PDMS) in large-strain regime. Starting from the basic principles of thermodynamics, an incremental variational formulation is derived. Within this model, the free energy density and dissipation function determine elastic and viscous properties of the solid. The main contribution of this paper is the estimation of the parameters in the proposed phenomenological model from measurements conducted on Sylgard184 samples. This non-linear material model simplifies to a Prony-series representation in frequency domain in case of small deformations. The coefficients of this Prony-series are detected from dynamical temperature mechanical analysis measurements. Time-temperature superposition allows to combine measurements at different temperatures, such that a sufficiently large frequency range is available for subsequent fitting of Prony-parameters. A set of material parameters is thus provided. The incremental variational formulation directly lends itself to finite element discretization, where an efficient and stable choice of elements is proposed for radially symmetric problems. This formulation allows to verify the proposed model against experimental data gained in ball-drop experiments.
10 February 2026 in Meccanica
This contribution presents a homogenization approach for the computationally efficient modeling of two-dimensional solid bodies that interact through structured surfaces. Instead of resolving the detailed microscale geometry, the method introduces a finite-thickness surrogate layer that captures the essential mechanical response of the structured contact zone. The proposed formulation is based on the description of microscale quantities, such as (normal) gap and relative sliding velocity, which are transferred to the macroscale using internal volumetric variables. The elastic behavior of the surrogate layer is identified through a mean-field homogenization approach that accounts for the non-linear dependency of stress response on the relative slip. As a result, the anisotropic and history-dependent behavior of the interface can be captured within the model. The proposed method is validated using two benchmark problems: a vertical stack of two structured blocks and a knurled interference fit. In both cases, the finite-thickness layer accurately reproduces the mechanical response of the fully resolved model, i.e., stick–slip transitions, hysteresis, and partial interface separation. The good agreement with the reference solutions, combined with a significant reduction in computational cost, demonstrates the potential of the method for efficient multi-scale interface modeling.
7 December 2024 in European Journal of Mechanics - A/Solids