Purpose: This study aims to prevent mild steel (MS) against corrosion in 0.5 M HCl solution, 2-amino-4-methoxy-6-methyl-1,3,5-triazine was used. The effectiveness of the compound as a corrosion inhibitor was studied via electrochemical, surface and theoretical calculation techniques.Design/methodology/approach: For concentrations ranging from 0.5 to 10.0 mM, almost similar polarization resistances were obtained from electrochemical impedance spectroscopy (EIS) and linear polarization resistance tests. It also investigated inhibitive activity of 2-amino-4-methoxy-6-methyl-1,3,5-triazine on the steel surface using scanning electron and atomic force microscope instruments. Langmuir adsorption is the best matched isotherm for the adsorption of the inhibitor to the steel surface.Findings: EIS method was used to determine inhibition efficiency, which was determined to be 95.7% for 10.0 mM inhibitor containing acid solution. Density functional theory’s predictions for quantum chemistry agreed well with the other experimental results.Originality/value: The methods used in this study are effective and applicable; the used organic inhibitor is 2-amino-4-methoxy-6-methyl-1,3,5-triazine; and protective effectiveness is important, which is crucial for the task of MS corrosion prevention.
11 September 2020 in Journal of Materials Science: Materials in Electronics
This study investigates the structural, morphological, and photocatalytic properties of monometallic (Ag and Cu) and bimetallic (AgCu) nanoparticles (NPs) incorporated into ZnO NPs and their photocatalytic performance. X-ray diffraction and Rietveld refinement were employed to analyze the structural characteristics, revealing the formation of a hexagonal wurtzite structure of ZnO and cubic phases of Ag and Cu within the metal-decorated NPs. Scanning electron microscopy provided visual evidence of the spherical morphology, with an average particle size of 50 nm. Energy-dispersive X-ray spectroscopy confirmed the successful deposition of Ag, Cu, and AgCu NPs onto the ZnO surface. The photocatalytic efficiency of the NPs was evaluated by the degradation of methylene blue dye under UV light at a wavelength of 254 nm under sunlight irradiation. Under UV light, the bimetallic AgCu/ZnO system exhibited exceptional performance, achieving a degradation rate of about 95% with 10% AgCu/ZnO. Conversely, under sunlight illumination, the monometallic Cu/ZnO and Ag/ZnO NPs exhibited outstanding photocatalytic properties, with degradation rates of about 99 and 98%, respectively. These findings underscore the influence of the light source on photocatalytic performance as well as the significance of the plasmonic effects and charge-transfer mechanisms.
19 August 2020 in International Journal of Energy Research
Five years of outdoor atmospheric corrosion tests of hot dip galvanized steel samples were performed, for products of continuous galvanizing and after fabrication batch galvanizing processes. For the purpose of comparison between corrosion performances of these two different galvanizing process products, an industrial coastal area (Gemlik-Bursa/TURKEY) was chosen for outdoor testing, which fits into C4 type corrosive atmosphere definition, according to ISO 9223. Samples were studied in laboratory with accelerated salt spray exposure test and electrochemical methods. Corrosion products formed on exposed samples and cross section of coatings are analyzed by SEM. Lead is observed to change the corrosion characteristics of the coatings with change in constituents of environments. In saline electrolytes, alloying of lead is found to accelerate corrosion rate. This metal deposits as cluster on top layer of the galvanized coatings and acts as strong cathodes with respect to the zinc and accelerates the corrosion rate. It was determined that differences in dip and continuous galvanization processes cause dramatic differences in the elemental composition, morphology and regional hardness values of coatings. In the comparison of corrosion resistance, lower performance of the dip galvanized coating, although it is much thicker, has been shown due to the differences mentioned above.