28 February 2022 in IEEE Access
The disturbance and uncertainty of the motor drive systems are very complicated terms. There is no exception for the slotless-self bearing motor (SSBM), where the perturbations of the bearing motor are mainly came from the outside as the wind affect, from inside as the thermal changing of the coils, and incorrect modeling of the winding processes. First, to delete these inversed terms, this paper proposes a new super-twisting disturbance observer (STDOB) to obtain the desired goal of the robust control design. The proposed disturbance observer was based on the information of measured and estimated states with the aim of softening the cost of the measurement. Second, to estimate the velocities and accelerations of the movements on $x-$ and $y-$ axes, the stability concept of homogeneous function-based was used to design the fixed-time state observers (FTSOBs) for these axes. The state of the rotational operation on $\omega -$ axis was estimated with a fixed-time state observer. Third, to control the positions and rotational speed, a variable boundary layer thickness (VBLT) fixed-time sliding mode control (FTSMC) was designed to force these positions and speed states converge to the desired goals. Finally, the stability of the proposed control algorithm was theoretically verified by using Lyapunov condition and simulation of MATLAB software. The obtained states were acceptably stable with small overshoots, small settling-times, and stable steady-states.
1 January 2022 in Journal of the Japan Society of Applied Electromagnetics and Mechanics
This paper introduces a five-axis active-controlled axial-flux self-bearing motor that uses unipolar and four-pole magnetic fields to control radial force and tilt moment of the two-pole permanent magnet rotor. The proposed method controls the only one-axis radial force and tilt moment by a unit of the rotor and stator, therefore two units are necessary for radial motion control. The stators can be placed on the double-side and single-side of the rotor. In this paper, the principle of the proposed motor is introduced, and the radial force and tilt moment are analyzed theoretically. Then two experimental devices with double-side and single-side stators are made and levitation and rotation tests are carried out. The results confirm that the proposed motor achieved stable rotation up to 900 rpm in a double-side stator and 440 rpm in a single-side stator.
1 January 2022 in Journal of the Japan Society of Applied Electromagnetics and Mechanics
When a momentary large current in opposite directions flows through the two opposing spiral coils, a momentary strong magnetic field in opposite directions is generated in the two coils. The strong magnetic field creates an impact force between the two coils. When a permanent magnet is placed under the spiral coils, the impact force of the actuator is enhanced because of the Lorentz force generated by the static magnetic field. In this paper, we introduce the principle of electromagnetic impact force generation and the calculation method of electromagnetic impact force. The magnetic fields generated by the spiral coil and the permanent magnet are analyzed by the finite element method. Then the electromagnetic impact force is derived from the current waveform and magnetic field. The shape of the spiral coil and permanent magnet is examined to maximize the electromagnet impact force.