8 January 2020 in Journal of Materials Chemistry A
Measurements of the gas sensing performance of nanomaterials typically involve the use of interdigitated electrodes (IDEs). A separate heater is often integrated to provide elevated temperature for improved sensing performance. However, the use of IDEs and separate heaters increases fabrication complexity. Here, a novel gas sensing platform based on a highly porous laser-induced graphene (LIG) pattern is reported. The LIG gas sensing platform consists of a sensing region and a serpentine interconnect region. A thin film of metal (e.g., Ag) coated in the serpentine interconnect region significantly reduces its resistance, thereby providing a localized Joule healing in the sensing region (i.e., self-heating) during typical measurements of chemoresistive gas sensors. Dispersing nanomaterials with different selectivity in the sensing region results in an array to potentially deconvolute various gaseous components in the mixture. The self-heating of the LIG gas sensing platform is first studied as a function of the applied voltage during resistance measurement and LIG geometric parameters (e.g., linewidth from 120 to 240 μm) to achieve an operating temperature from 20 to 80 °C. Systematic investigations of various nanomaterials demonstrate the feasibility of the LIG gas sensing performance. Taken together with the stretchable design layout in the serpentine interconnect region to provide mechanical robustness over a tensile strain of 20%, the gas sensor with a significant response (6.6‰ ppm−1), fast response/recovery processes, excellent selectivity, and an ultralow limit of detection (1.5 parts per billion) at a modest temperature from self-heating opens new opportunities in epidermal electronic devices.
4 December 2018 in Journal of Materials Chemistry B
Electrospinning is a straightforward, cost-effective, and versatile technique for fabrication of polymeric micro/nanofibers with tunable structural properties. Controlling the size, shape, and spatial orientation of the electrospun fibers is crucial for utilization in drug delivery and tissue engineering applications. In this study, for the first time, we systematically investigate the effect of processing parameters, including voltage, syringe needle gauge, angular velocity of rotating wheel, syringe-collector distance, and flow rate on the size and alignment of electrospun PLGA fibers. Optimizing these parameters enabled us to produce highly aligned and monodisperse PLGA fibers (spatial orientation >99% and coefficient of variation <0.5). To assess the effect of fiber alignment on the release of encapsulated drugs from these fibers, we incorporated dexamethasone, an anti-inflammatory drug, within highly-aligned and randomly-oriented fibers with comparable diameters (∼0.87 μm) and compared their release profiles. In vitro release studies revealed that the aligned fibers had less burst release (∼10.8% in 24 h) and more sustained release (∼8.8% average rate of change for 24 days) compared to the random fibers. Finally, the degradation modes of the aligned and random fibers after 25 days incubation were characterized and compared. The findings of this study can be applied for the development of 3D degradable aligned fibers for controlled drug release and tissue engineering applications.
13 February 2019 in ACS Applied Materials & Interfaces
11 September 2020 in ACS Applied Materials & Interfaces
28 September 2018 in ACS Applied Materials & Interfaces