1 March 2015 in Bioresource Technology
1 January 2019 in Biomass and Bioenergy
ERElém Patrícia Alves Rocha
Elém Patrícia Alves Rocha
ACAngélica de Cassia Oliveira Carneiro
Angélica de Cassia Oliveira Carneiro
FGFernando José Borges Gomes
Fernando José Borges Gomes
+1
1 November 2011 in BioResources
Commercial bamboo chips were evaluated as raw material for dissolving pulp production. The chips were auto-hydrolyzed (AH) and subsequently cooked by the NaOH/AQ process and bleached to full brightness with the O-CCE-D-(EP)-D-P sequence. The term CCE designates a cold caustic extraction stage. The bamboo chip chemistry (22.4% lignin, 19.5% xylans, 49.3% cellulose, 16.8% total extractives, and 1.5% ash) was apparently unfavorable; however high quality dissolving pulp was produced using the aforementioned technologies, even when compared to results obtained with traditional eucalypt commercial wood chips. The pulp showed high brightness (92.4 % ISO) and α-cellulose content (94.9%). Its contents of hemicelluloses, extractives and ash were within acceptable levels for a dissolving pulp aimed at viscose rayon production. Thus, the bamboo chip furnish investigated can be regarded as a viable raw material for dissolving pulp production.
27 October 2016 in Journal of Wood Chemistry and Technology
Lignin-carbohydrates complexes influence many chemical properties in the wood, such as difficult-to-remove lignin from Kraft pulps at the end of pulping due to the occurrence of lignin carbohydrates bonds. Therefore, this study aimed to study the influence of lignin-carbohydrate complexes on eucalyptus Kraft pulping. Spectroscopic techniques (13C NMR and HSQC-2D) were applied for the determination and quantification of lignin-carbohydrate complex (LCC) structures, and then evaluated the effect of LCC on Kraft pulping of eucalyptus hybrids. The analytical tools allowed the identification and quantification of the benzyl ether, γ-ester, and phenyl glucoside linkages of the lignin-carbohydrate complexes in eucalyptus hybrid wood. The glycosidic phenyl and γ-ester linkages are, respectively, more and less significant from the quantitative point of view. Analysis of 13C NMR of the samples showed that the eucalyptus hybrid GxGL contained high β-O-4 linkages content and also higher pulping yield than the other samples, suggesting that the linkages between lignin are more important than LCC linkages in pulping.
1 January 2015 in International Journal of Forestry Research
Eucalypt wood is becoming the most important raw material for the pulp industries in South America. However, due to the high wood cost in comparison to other raw material sources, nonwoody materials are also being investigated aiming at pulp production. In this way, this paper aimed at the evaluation of eighteen eucalypt clones obtained from the Brazilian Genolyptus project, regarding their potential characteristics for pulp production. Aiming at the same goal, two species of elephant grass were also evaluated as alternative raw material sources. Through the analyses of the anatomic and chemical characteristics, five eucalypt clones and one elephant grass species were indicated for pulp production and biorefinery application. The results of this study indicate the high technological quality ofEucalyptusclones evaluated and indicate that they can be used for biorefinery applications since they have the suitable characteristics. In general, the eucalypt clones are less moist and denser and contain fewer minerals and extraneous materials than the elephant grass species, which make them more attractive for utilization in deconstruction studies aiming at production of bioproducts.
1 March 2015 in Industrial Crops and Products
MMMarcelo Coelho dos Santos Muguet
Marcelo Coelho dos Santos Muguet
AGAdriana de Fátima Gomes Gouvêa
Adriana de Fátima Gomes Gouvêa
+1