27 February 2024 in IEEE Antennas and Wireless Propagation Letters
A microwave metalens, consisting of two circular metasurfaces, is proposed to achieve zoom functionality through mechanical rotation. The phase distribution across different regions on each metasurface follows an arithmetic sequence along the angular direction. Upon rotating one of the metasurfaces, the overall phase distribution on the metalens changes accordingly to meet the requirements of different focal lengths. The metalens operates at 15 GHz with a radius of 80 mm. At rotation angles of 0°, 45°, and 90°, the expected focal lengths are 20 mm, 60 mm, and 100 mm, respectively. The simulated electric field intensity at these focal points is 4.8 V/m, 5.6 V/m, and 4.0 V/m, respectively. Experimental results align closely with simulation outcomes. Due to its straightforward implementation principle, the proposed method holds promise for application in near-field focusing scenarios.
24 June 2024 in IEEE Transactions on Plasma Science
This article presents a study on the utilization of annular beams in broadband helix traveling wave tubes (HTWTs). The research delves into the beam-wave interaction (BWI) performance of HTWTs under different hollow electron beam conditions. The theoretical analysis includes the use of gain parameter $C$ and space charge parameter $QC$ to evaluate the performance within the linear interaction region. Based on the analysis, a 4–20 GHz ultra-wideband traveling wave tube (TWT) based on a hollow beam scheme was designed using the software microwave tube simulator suite (MTSS). The design process involved optimizing the slow wave structure (SWS), the BWI performance, the electron gun, and the magnetic system. An output power greater than 109 W is achieved, and the small signal gain is better than 23 dB across the entire operating bandwidth. The particle-in-cell (PIC) solver in CST was used to verify the saturated gain of the designed TWT.
18 March 2025 in IEEE Transactions on Electron Devices
The electron optics simulator (EOS) and the magnetic focusing simulator (MFS), part of the microwave tube simulator suite (MTSS), use the finite element method (FEM) to calculate electrostatic fields, electron trajectories, and magnetic fields in both 2-D and 3-D models. With the growing demand for high-precision and multiscale computations, EOS and MFS are required to handle problems with numerous meshes, leading to a sharp increase in the number of unknowns in the matrix equation. To tackle this challenge, EOS and MFS have implemented the domain decomposition method (DDM) based on the dual-primal finite element tearing and interconnecting (FETI-DP) algorithm, which is well-suited for parallel computation and is expected to enhance solving efficiency for large-scale analysis. This article presents the implementation and the computational performance of the FETI-DP algorithm in EOS and MFS. Test results show that the FETI-DP algorithm offers significant advantages in computational time in most cases. Additionally, tests demonstrate that EOS and MFS can perform parallel computing, enabling the analysis of large-scale 2-D axisymmetric electron optics systems and significantly accelerating computation speed.
2 April 2020 in Measurement Science and Technology
In the development of space traveling wave tubes (TWTs), there have been many problems in testing their performance, such as too many test sections, complex operation processes, long test times and large amounts of test data. In this paper, an integrated test system for space TWTs is studied to achieve an accurate, fast and complete test of its full electrical parameters. The system can automatically switch the test instruments according to the tested contents, which eliminates the manual operation of setting the test bench and reduces personal error. Then, the one-button testing of full electrical parameters is realized by means of automatic test software of space TWTs, which greatly improves the test efficiency. Moreover, a standardized and scientific test data management system is established to ensure the integrity and objectivity of the test data. Finally, the testing accuracy and stability of the system are verified by data comparison.
3 April 2026 in IEEE Transactions on Plasma Science
This study presents an innovative structural design for pixelated electron guns, coupled with a dedicated structural screening algorithm. By constructing a convolutional neural network (CNN) model for the anode component, we achieve high-precision forward prediction of key electron gun parameters—emission current, operational range, and beam waist radius. Simulation-based validation demonstrates a minimal average relative error (ARE) of 0.54% between predicted and simulated results. Furthermore, leveraging the established CNN framework with parameter standardization methodology, we demonstrate rapid inverse synthesis of pixelated electron guns. The inverse design yields an ARE of 8.27% compared to the target specifications. This integrated approach significantly broadens design flexibility while enhancing developmental efficiency for electron gun systems.
1 January 2025 in IEEE Microwave and Wireless Technology Letters
Based on our previous research on the explicit–implicit hybridizable discontinuous Galerkin time-domain (ex–imHDGTD) method, this letter gives two important applications in time-domain multiscale electromagnetics. The first is that the different ratios of both coarse and refined meshes are discussed, which shows that grid division strategy has a significant effect on the performance of ex–imHDGTD. The second is that a total-field/scattered-field (TF/SF) method is derived to impose the excitation on interfaces instead of boundary faces. Compared with the traditional hybridizable discontinuous Galerkin (HDG) method, the introduction of TF/SF changes the formulations of both local and global linear systems. Once applying this TF/SF in ex–imHDGTD, it is very easy for 3-D waveguide problems to obtain the transmitted and reflected waves. Note that this is the first time the TF/SF is used in the ex–imHDGTD method. Numerical results show that the proposed applications are feasible due to higher computational performances.