Kenneth E. Kolodziej

Kenneth E. Kolodziej

Auto-generated profile, based on publicly available information

Kenneth E. Kolodziej

MIT Lincoln Laboratory, Lexington, MA, USA

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 February 2019 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
KKKenneth E. Kolodziej
Kenneth E. Kolodziej
BPBradley T. Perry
Bradley T. Perry
JHJeffrey S. Herd
Jeffrey S. Herd
In-band full-duplex (IBFD) technology can enable unique system capabilities and network architectures by allowing devices to transmit and receive on the same frequency at the same time. While previously considered impossible, this ability can now be used to optimize resource sharing within the crowded frequency spectrum for various communication systems, including 5G new radio. The potential of these IBFD systems can only be realized if each device incorporates a sufficient number of self-interference cancellation techniques to ensure that its receivers do not saturate. This tutorial survey offers the most comprehensive collection to date of these techniques and discusses how all of them can be implemented within the different domains of a typical transceiver. In addition, the results of a novel IBFD system study are presented for more than 50 demonstrated communication systems with more than 80 different measurement scenarios. The various system parameters are then combined into a new figure of merit, which can be used to propel future research and accelerate the inclusion of IBFD technology within an upcoming wireless standard.

8 March 2024 in Proceedings of the IEEE
Verified
Journal Article
Closed access
BSBesma Smida
Besma Smida
RWRisto Wichman
Risto Wichman
KKKenneth E. Kolodziej
Kenneth E. Kolodziej
HSHimal A Suraweera
Himal A Suraweera
TRTaneli Riihonen
Taneli Riihonen
ASAshutosh Sabharwal
Ashutosh Sabharwal
In this article, we review the key concepts and the progress in the design of physical-layer aspects of in-band full-duplex (IBFD) communications. One of the fundamental challenges in realizing IBFD is self-interference that can be up to 100 dB stronger than signals of interest. Thus, we start by reviewing state-of-the-art research in self-interference cancellation, addressing both model-based and emerging machine learning-based methods. Then, we turn our attention to new wireless systems with many degrees of freedom for which the traditional IBFD designs do not gracefully scale and, hence, require many innovations to enable IBFD. We provide an extensive review of basic concepts and state of the art in massive multiple-input–multiple-output IBFD. Then, we consider the mmWave band IBFD and review advanced physical-layer architectures. The above review provides the proper context to discuss IBFD innovations and new challenges for sixth-generation networks and beyond, where wireless networks are envisioned to be multifunctional, combining communications with functions such as sensing, cognitive radios, physical-layer security, and wireless power transfer. We conclude this article with a status update on the adoption of IBFD in communication standards.

15 September 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
XCXibi Chen
Xibi Chen
XYXiang Yi
Xiang Yi
MKMuhammad Ibrahim Wasiq Khan
Muhammad Ibrahim Wasiq Khan
XLXingcun Li
Xingcun Li
WCWenhua Chen
Wenhua Chen
RHRuonan Han
Ruonan Han
This article presents a 140-GHz frequency-modulated continuous-wave (FMCW) radar transceiver featuring transmit/receive (TX/RX) antenna sharing that address a TX/RX beam misalignment problem when large-aperture lenses/mirrors/reflectarrays are used for pencil beam forming. A full-duplexing technique based on circular polarization and geometrical symmetry is applied to mitigate the 3 dB + 3 dB insertion loss inherent to conventionally adopted directional couplers, while still maintaining high TX-to-RX isolation. In addition, a self-adaptive self-interference cancellation (SIC) is implemented to suppress extra leakage due to antenna mismatch from a desired frontside radiation scheme. The TX/RX antenna sharing enables the pairing with a large 3-D printed planar lens and boosts the measured effective isotropic radiated power (EIRP) to 25.2 dBm. The measured total radiated power and minimum single-sideband noise figure (SSB NF) including antenna and duplexer losses are 6.2 dBm and 20.2 dB, respectively. The measured total TX-RX isolation is 33.3 dB under 14-GHz wide FMCW chirps. Based on a 65-nm complimentary metal–oxide–semiconductor (CMOS) technology, the chip has a die area of 3.1 mm2 and consumes 405 mW of dc power. Among all reported sub-THz transceivers with TX/RX antenna sharing, this work demonstrates the highest total radiated power and is the only work that has >30 dB of TX-RX isolation while mitigating the inherent 6 dB coupler loss.

18 February 2019 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
KKKenneth E. Kolodziej
Kenneth E. Kolodziej
SYSiva Yegnanarayanan
Siva Yegnanarayanan
BPBradley T. Perry
Bradley T. Perry
In-band full-duplex (IBFD) wireless systems offer the ability to revolutionize frequency spectrum utilization for future networks. This is only possible if the self-interference generated by each wireless node is sufficiently mitigated, and becomes more challenging as the bandwidth increases. RF cancellation is one of the critical components that enables this interference reduction, but has previously been limited to narrowband operation or restricted to distinctive environments. This paper presents a novel RF canceller that utilizes photonic components to create a wideband vector modulator architecture with tunable time-delay taps. A prototype system with 20 canceller taps has been demonstrated to provide 25 and 20 dB of cancellation over 500-MHz and 1-GHz instantaneous bandwidths, respectively, and is tunable between 0.5 and $5.5$ GHz. This unique photonic-enabled RF canceller design provides a path forward to achieve the wideband operation and high tap counts that will be required to successfully deploy future wireless systems with IBFD technology.

14 May 2021 in IEEE Open Journal of the Communications Society
Verified
Journal Article
Open access
KKKenneth E. Kolodziej
Kenneth E. Kolodziej
ACAidan U. Cookson
Aidan U. Cookson
BPBradley T. Perry
Bradley T. Perry
The fifth-generation wireless system framework provides the option to evaluate the performance of in-band full-duplex (IBFD) operation through flexible duplexing. The resulting self-interference, however, must be mitigated within a fraction of a symbol duration for successful communication. This paper introduces the use of neural network machine learning to accelerate the tuning of multi-tap adaptive RF cancellers. Additionally, the optimal network configurations, input data structures and training dataset densities that optimize the performance of this technique are presented. The tuning results of a prototype system using a two-tap canceller were measured over 20 and 100 MHz bandwidths centered at 2.5 GHz, and demonstrated averages of 40 dB cancellation and 6 tuning iterations. These results are compared to a survey of previously-reported adaptive cancellers, and illustrate that this novel application of machine learning to RF canceller tuning provides the fastest convergence speed to date, which can enable IBFD operation in dynamic interference environments.

16 September 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
KKKenneth E. Kolodziej
Kenneth E. Kolodziej
ACAidan U. Cookson
Aidan U. Cookson
BPBradley T. Perry
Bradley T. Perry
Future wireless systems that take advantage of in-band full-duplex (IBFD) technology require that the consequential self-interference (SI) be sufficiently mitigated for successful operation. Many IBFD designs utilize a multitap RF cancellation stage that necessitates the optimal configuration of multiple weights to accurately replicate real-world multipath SI channels. The nonconvex error surfaces generated by these channels present different features that can be challenging to navigate for canceller tuning algorithms. This article introduces a novel adaptive learning rate approach that utilizes a target error and a gradient estimation that is progressively forgotten over time to accelerate convergence speed and maximize cancellation performance. The tuning characteristics of a prototype system using this algorithm to set the weights of a two-tap canceller were measured over a 20-MHz bandwidth centered at 2.5 GHz and produced an average of more than 35 dB of cancellation for various SI channels with tuning times that are significantly less than previous approaches. The performance of this unique method was also studied against other tuning techniques, and results indicate that it could supplant traditional adaptive learning approaches for future IBFD systems.