The influence of postdeposition annealing on the structural and optical properties of rf sputtered insulating zinc oxide films has been investigated. The as‐grown films deposited on quartz substrates were highly c‐axis oriented and in a state of stress. These films become almost stress free after a postdeposition annealing treatment at 673 K for 1 h in air. Above 673 K, a process of coalescence was observed which causes major grain growth resulting in microcrack formation and surface roughness. The refractive index shows a strong frequency dispersion below the interband absorption edge. The optical dispersion data have been fitted to (1) a single oscillator model and (2) the Pikhtin–Yas’kov model. The origin of optical dispersion at different annealing temperatures has been discussed in the light of these models. A packing density of more than 99% is estimated in the film annealed at 673 K, indicating that these films are almost void free.
CuO nanoparticles on sputtered thin-film surface exhibit a fast response speed (14 s) and recovery time (61 s) for trace level (20 ppm) gas detection. The sensitivity of the sensor is noted to be high at a low operating temperature of 130 °C. CuO nanoparticles on allow effective removal of excess adsorbed oxygen from the uncovered surface due to spillover of hydrogen dissociated from the interaction.
Cholesterol oxidase (ChOx) has been immobilized onto zinc oxide (ZnO) nanoporous thin films grown on gold surface. A preferred -axis oriented ZnO thin film with porous surface morphology has been fabricated by rf sputtering under high pressure. Optical studies and cyclic voltammetric measurements show that the bioelectrode is sensitive to the detection of cholesterol in range. A relatively low value of enzyme’s kinetic parameter (Michaelis-Menten constant) indicates enhanced enzyme affinity of ChOx to cholesterol. The observed results show promising application of nanoporous ZnO thin film for biosensing application without any functionalization.