Palygorskite is a clay mineral that has several industrial and environmental applications. Palygorskite main deposits in Brazil are located in the municipality of Guadalupe, Piauí. A comparative study was performed with five samples of palygorskite from different locations through ore dressing and chemical and mineralogical characterization, using the XRD, XRF and methylene blue titration techniques. According to the results, there are significant differences in the samples composition. Among them, the most significant difference was the cation exchange capacity (CEC) value, which ranged from 24.0 to 41.0 meq.100 g-1, followed by the content of some oxides and the crystalline phases present. Despite coming from the same region, the samples contained distinct impurities.
In the last few years, the presence of geosmin (GEO) in water bodies has caused serious problems related to water consumption by the population. Many studies focus on its occurrence and detection, but little is discussed about the technologies for treatment and removal of this contaminant. In this way, the present work aims to present a bibliographic search and a bibliometric analysis carried out in the Web of Science database and in VOSviewer software about geosmin remediation, in the last 10 years. 100 articles were found, of which only one, from 2021, was a review. It was possible to assess that the subject has gained greater notoriety in the last 7 years, since the year 2016 marked the increase of publications on the subject, as well as an increasing number of citations. Among the most published countries is the People’s Republic of China, with 53% of publications. Bibliometric analysis showed that GEO is directly related to 2-methylisoborneol (2-MIB), since both occur simultaneously in water bodies. In addition, it was possible to identify that adsorptive processes are the most used in the removal of these contaminants, followed by advanced oxidative processes and biological processes, in that order.
A fase mineral sodalita foi obtida com sucesso a partir de reações hidrotérmicas com o uso de caulim proveniente da região Borborema-Seridó (RN/PB), hidróxido e carbonato de sódio. Desse modo, o caulim, com granulometria menor que 37 μm, foi tratado inicialmente em diferentes temperaturas. A calcinação foi realizada nas temperaturas de 500, 700 e 900°C com o objetivo de formar a metacaulinita. Os produtos calcinados foram submetidos à síntese hidrotermal por 1 e 4h, no qual foram utilizados Na2CO3 e NaOH. De acordo com os resultados, nos caulins calcinados a 700 e 900°C ocorreu a completa transição de fase da caulinita para a metacaulinita e, para a síntese no qual utilizou o caulim calcinado a 700°C ocorreu a formação da fase zeolítica sodalita básica caracterizada por difração de raios X e espectroscopia vibracional no infravermelho que mostrara picos e bandas intensas e definidas indicando maior cristalinidade do material.