We successfully developed a breast cancer cell line (MCF-7) cytotoxic assay using iron oxide nanoparticles (IONPs) prepared by mixing Beta vulgaris and Punica granatum extracts with iron chloride (III) salts at 200°C for 2 h using a simple chemical method. IONPs were diagnosed using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and photoluminescence (PL). XRD measurements exhibited a crystallite size of 38 and 37 nm with hexagonal and cubic structures for IONPs made using two plant (Beta vulgaris and Punica granatum) extracts, respectively. FE-SEM images revealed that the average IONP grain size was 44.81 and 29.77 nm for the two plant extracts, respectively, and PL measurements showed that the band edge emission was 2.64 and 2.60 eV, respectively, for IONPs. The IONPs were applied as a medical treatment for a human breast cancer cell line, and the inhibition rate% results were found to be relatively high and interesting (59.4% and 76.3%, respectively, for MCF-7).
Iron oxide (Fe880O) nanoparticles (IONPs) were synthesised via a chemical reaction by mixing hot red pepper with waste rust iron extract at 300°C for 1.5 hours to study the resulting antibacterial activity. The structural and optical properties of the NPs were characterised using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), UV-visible spectroscopy (UV-Vis), and Fourier-transform infrared spectroscopy (FTIR). The antibacterial activity of the IONPs was examined in comparison with that of gram-positive; Staphylococcus aureus, Bacillus subtilis, and gram-negative; and Escherichia Coli and Klebsiella pneumonia bacteria. Additionally, this information was used to investigate the accumulation of spent iron extract from the environment, its conversion into an efficient basic material to synthesise Fe880O NPs, and their utility for medical treatments. The results yielded important information regarding the properties of IONPs (e.g. crystallite size, particle size, energy band gap, and absorption band strength) and their inhibition on both bacterial strains. Finally, this research will pave a new path for exploring how to utilise rust iron and transform it from harmful to beneficial material.
23 August 2023 in Natural Resources for Human Health
Iron oxide nanoparticles (IONPs) have been widely used in environmental applications due to their low cost, safety, and effectiveness. This research successfully produced IONPs by hydrothermally reacting iron rust and Aloe vera gel plant extract at 100 oC for 18 hours in an autoclave cell. IONPs were produced to prevent detrimental effects on human health by degrading methylene blue dye (MB). IONPs were characterized by XRD, FE-SEM, and FT-IR spectroscopy. The small crystalline size (19 nm), and (inverse cubic) structure (magnetite) of (Fe3O4 NPs) 600 oC were explained by measurements of XRD, whereas small crystalline (Fe902O) NPs of 300 oC were of 28 nm. FESEM revealed that the particle size of (Fe3O4) NPs at 600 oC using an aloe vera extract was (26.80 to 37.96) nm, whereas Fe902O (wustite) at 300 oC was tiny and crystalline at (31.63 to 130.3) nm. The strong absorption band for Fe3O4 NPs (magnetites) at 600 °C with aloe vera is explained by the FT-IR spectra. The absorption peak was high at (650) cm-1 and corresponded to the Fe-O series of Fe902O NPs at 300 oC. When the spectra showed the absorption peak, it was strong. Iron oxide NPs have been used for a short time in environmental treatment to remove MB dye. For 40 minutes of IONPs (Fe3O4), the results of degradation effectiveness (95%) were 300 oC for MB dye, but degradation efficiency (91%) was 75 minutes of IONPs (Fe902O) with aloe vera at 600 oC for MB dye.
1 April 2021 in Journal of Physics: Conference Series
Facile and eco-friendly green synthesis route was used to fabricate pure ZnO nanoparticles (NPs) and silver doped ZnO nanocomposites (Ag-ZnO NCPs) using essential ginger oil (EGO) as reduction agent. These Ag-ZnO NCPs were determined and characterized via various analytical tools such as X-ray diffraction, FESEM, and UV-Vis spectrophotometer. X-ray diffraction patterns confirmed the crystallinity of single ZnO that showed a hexagonal wurtizite (HW) structure with preferential orientation in the (100) direction and the Ag NPs verified face center cubic (FCC) structure with preferred orientation in the (111) direction. The FESEM images exposed uniformly distributed triangle cages of ZnO NPs and nanowires shape of Ag-ZnO NCPs. The UV-Vis absorption band of as-synthesized Ag-ZnO NCPs showed sharp and minor peaks at 395 nm and 550 nm. Photocatalytic activity of Ag-ZnO NCPs was obtained through methylene orange (MO) dye degradation tests, which exhibited remarkable photodegradation efficiency around ≈ 90% after 150 min under UV light. In contrast, single ZnO revealed photodegradation efficiency ≈ 84% at 150 min UV light exposure. These Ag-ZnO NCPs can offer a great potential for large demands of semiconductor applications.
Environmental sustainability and human health are globally imperilled by oil-contaminated water resulting from oil spill disasters or industrial disposal. Superhydrophobic materials have gained increasing attention in oil–water separation to fulfil the ever-growing need for highly effective oil–water separation. Due to the regeneration ability of silicon dioxide nanoparticles (SiO2), superhydrophobic/superolephilic nanocomposite (ZnO-SiO2) was created using a new, simple flame treatment procedure. ZnO(NRs) was coated on stainless steel mesh via water bath deposition method and modified with silicon rubber ( RTV-SR) solution. The mesh coated exhibited an excellent superhydrophobic surface with water at a contact angle 168±1°, a sliding angle 3.5° and superolephilic with oil contact angle OCA (0°). The x-ray diffraction, contact angle measurement, field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR), and energy dispersive spectroscopy (EDS) were used to describe the coated mesh surface. Kerosene-water, diesel oil–water mixtures and sunflower oil–water are successfully separated by the simple filtering method using the coated mesh with a separation efficiency of 96%.